Panasonic Televison and Video Repair Questions, Solutions and Tips - Vr2020

Panasonic Televison & Video - Recent Questions, Troubleshooting & Support

I was interesting in asking HDMI picture really work.
You should tell us more briefly the terms.

Panasonic... | Answered on Oct 17, 2018

Pan use a version of Linux on the recorder. If you change the hard drive there is a format command in setup to format a new hard drive. Put a DVD in and try selecting and playing both DVD and HHD via the front panel buttons. Sometimes you can get error codes on a unit when the batteries in the remote are low. Try changing them Sometimes the remotes are faulty and not communicating properly. A fix in some cases is to press the number button corresponding to the number shown on the display together with the enter or OK button for at least 2 seconds. Good luck

Panasonic... | Answered on Oct 15, 2018

Google Panasonic tv/vcr <model> manual

Panasonic... | Answered on Oct 14, 2018

Check your stand by voltage on main board and power supply cable..should see marking on PS for Stby 5v. I you have the 5v change main board or A board it is not supplying your voltage back to PS to turn on. If you dont have 5v stand by change PS.

Panasonic 50... | Answered on Oct 13, 2018

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.

Panasonic... | Answered on Oct 12, 2018

CVC is not a fault indication, it's actually the video trying to play your tape at the best quality. I think it stands for Crystal Vision Clarity, or something like that. Without knowing what's happening (IE what you see on the screen) I can't help futher. Though I would suggest you try a cleaning tape, as that can clear up many loss of picture problems, if that is what is happening to yours.

Panasonic... | Answered on Oct 12, 2018

Not finding what you are looking for?
Panasonic Logo

Family Lines

25,844 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Panasonic Televison & Video Experts


Level 3 Expert

5585 Answers


Level 3 Expert

509 Answers

The Knight
The Knight

Level 3 Expert

75888 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides