Miele Washing Machines - Recent Questions, Troubleshooting & Support


CHECK FOR A PLUGGED VENT PIPE IF NOTHING IS FOUND CALL THE REPAIR SERVICE

Miele Washing... | Answered on Feb 06, 2019


Lay machine on floor , removed white motor cover , unscrew motor connection block screws disconnected connectors, and slowly remove, fit the new brushes, and place connect block back on front of motor, using a torch , guide carbons and inserts back into the motor with a small screwdriver

Miele Washing... | Answered on Feb 03, 2019


We had the same problem on a Premier 500 and solved it by tilting the machine forward. Some more water ran out and the lights went off.

Miele Novotronic... | Answered on Jan 31, 2019


Hi dear. Your machine needs new shock absorbers and drum tension springs replacement. I can advise to contact your local Miele center. Thanks.

Miele Washing... | Answered on Jan 29, 2019


fix the leak.

Miele Washing... | Answered on Jan 28, 2019


I just received this error message on my Miele WPS 4146 (Waterproof Fault) Prior to this I had an error message regarding the Drain outlet, so I opened the drain outlet and cleaned it. I think I might have opened it too quickly and therefore creating the (Waterproof Fault). The problem is that when you open the drain outlet too quickly the water runs into the bottom of the washing machine where some sensor lies and you get the (Waterproof Fault) error message on the display and not even turning off the machine will do anything to get rid of this annoying message.

So here is the fix that worked for me.

1. Turn off the machine
2. Unplug it
3. Open the drain outlet and take out the plug.
4. Dry all the visible water with a cotton cloth.
5. Tilt the machine FORWARD and hold it until you see water gushing from underneath the machine.
6. Repeat this until you see no more water.
7. Plug the machine back inn.
8 VOILA no error message! I hope in your case :)

Miele Washing... | Answered on Jan 23, 2019


the unit has a brake you cannot spin the drum in that way,with the back off there should be a lever with a cable on it pull the lever back and get someone to try the bowl then

Miele Washing... | Answered on Jan 19, 2019


Search f53 fault, has been answered previously :-)

Miele Washing... | Answered on Jan 17, 2019


At 12 years of age, repairs are likely to cost more than the machine is worth.

Miele Washing... | Answered on Jan 15, 2019


My tip: call the service department and ask them what the problem should be. If they refuse to answer, just ask over and over and over again until somebody will finally be connected to you which has to tell you how and what. If a company can repair it, they HAVE to give at least an answer to what is broken.

Miele Washing... | Answered on Jan 15, 2019


Miele washers have a small panel on front toward bottom of machine. Flip this panel open with the key provided inside the soap dispenser drawer. There should be a small orange coloured ring which you pull to release the door.
To cancel program press and hold the start button for about 5 or so seconds. this should give you the option of cancelling the program.
Hope this may help
cheers from down under

Miele Washing... | Answered on Jan 09, 2019

Not finding what you are looking for?
Miele Logo

2,290 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Miele Washing Machines Experts

Marvin
Marvin

Level 3 Expert

83951 Answers

shaun taylor

Level 3 Expert

1527 Answers

Brad Brown

Level 3 Expert

17956 Answers

Are you a Miele Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...