Mercury Computers & Internet - Recent Questions, Troubleshooting & Support

Hello try the driver form here:

Please unzip the file before you install.

Or add a AGP graphic card that supports your windows system.

Good luck

Mercury... | Answered Yesterday

Have a look at the service sheet that is supplied with the mother board. It can be downloaded from the manufacturers web site.

Mercury... | Answered on Apr 21, 2020

BLACK MACHINE>Press total. Press sh button then total (displays date). Press - *minus button. Key in current
If your VAT rate is 20% then divide the Gross by 1.2 60 / 1.2 = 50. Jul 8, 2014 Office Equipment & Supplies. 1 Answer. I tried to connect my mercury 130W etr ...

Mercury... | Answered on Apr 03, 2020

hyjackers, what is this device, tell that first. ok?
it is POINT of SALE (POS) device,
get the manual first, in all case.

or ask here.

last post was 2014, this thing is old.
try a fresh battery FIRST ?
are you in Kenya, we are USA and have not SUCH thing here.

Mercury... | Answered on Nov 28, 2019

What you mean by case study?

Mercury... | Answered on Oct 14, 2019

If my information is correct;

Orient the motherboard so that we are both looking at it in the same direction,
Processor to the top, Ram Memory slots to the right, white PCI slots to the bottom.

The front plastic panel of your computer that has the Power On button, Harddrive activity LED light, and Power On LED light, is the Front Panel.

The area of pins on the motherboard, that the wires from the Front Panel go to, is the Front Panel header.

The Front Panel header is all the way down on the right corner. Panel 1.

The Front Panel header, or Panel 1, is a rectangular block that is positioned lengthwise, across the bottom of the motherboard.

There are 4 pins across the Top, and 5 pins across the Bottom.

The pins are numbered.
They are numbered Even across the Top row.
Pins 2, 4, 6, and 8. (There is NO Pin 10. Just a blank spot)

They are numbered Odd across the Bottom row.
Pins 1, 3, 5, 7, and 9.

A) Pins 1 and 3 are for the HarDDrive activity LED light. (HDD LED)
Pin 1 is for the Positive wire. ( + )
{ Pin 2 is for the Negative wire. ( - ) }

If the LED light is dim when operating, turn the wires around.

B) Pins 5 and 7 are for a Reset switch, (Reset button), IF a Reset switch is used.
Pin 5 is for the Negative wire

C) Pin 9 is RVSD_DNU
Reserved Do Not Use.

D) Pins 2 and 4 are for the Power On LED light.
Pin 2 is for the Positive ( + ) wire.

If the LED light is dim turn the wires around.

E) Pins 6 and 8 are for the Power On switch.

For additional questions please post in a Comment.


Mercury... | Answered on Dec 04, 2018

Croatian language:

Where is the point of ignition on the Mercury 3.5hp 4t on the magnet have 8 pads that are powered by magnets and stale the valves? Thanks in advance.

Mercury... | Answered on Oct 23, 2018

Mercury... | Answered on Oct 09, 2018

I am not familiar with the model or the kit but increasing the negative camber, which presumably is the purpose of the kit, is a popular way of improving handling, sometimes at the expense of tyre life.

Unless there is a particular reason for modifying manufacturer's specifications it probably isn't wise to do so because it can open a whole different can of worms - if the process is to be successful an understanding of the theory will be useful as well as access to the equipment necessary for the final checking and setting of the angles and determining the new toe setting.

Mercury... | Answered on Oct 05, 2018

Police often can open a locked car with a metal bar if an emergency.

Mercury... | Answered on Aug 12, 2018

Not finding what you are looking for?
Mercury Logo

1,821 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mercury Computers & Internet Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Gustavo Ortiz
Gustavo Ortiz

Level 3 Expert

637 Answers

Are you a Mercury Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides