Maytag Dishwashers - Recent Questions, Troubleshooting & Support


The cycle timer may be defective.

Maytag... | Answered 3 days ago


Look at drain lines under sink, if you have PVC put a bucket or large plastic pan under and remove all the drain lines and inspect them. Look at air gap or ensure drain line highest point is just under the bottom of counter top,. look at pump in dw to ensure is is working.

Maytag... | Answered on Mar 12, 2019


contact maytag website tech support . .many things are here we have never seen either

Maytag... | Answered on Mar 07, 2019


I have an old GE that did the same thing, if I don't use it enough it will do the same thing. The hum is from the electric motor in the bottom trying to rotate. I don't know your machine but I assume they are all made closely the same. Remove the bottom cover. You should see the back of the motor and it will probably have some slots in the rear cover. Close the door and try to start it while looking through the rear slots. I saw mine turn like an 1/8 inch and stop. The first time it did this, I unplugged a connector feeding the motor, tried to start it to make sure it didn't do anything and then with a long thin screwdriver went to the slots to help turn the motor. The second time I discovered on the right side of the motor housing there was a small opening towards the front of the motor (rear of dishwasher) I was able to get my fingers in there and turn the motor a few times by hand, plug the connector back in and the dishwasher started right up. Seems like the engineers knew this could be a problem and left an access point for us (or dishwasher repairmen to use and charge us $80 or something)

Maytag... | Answered on Mar 03, 2019


That is possible. The unit should get water from a hot source anyway.The internal heater just raises the temp of the water if it needs to.

Maytag... | Answered on Feb 27, 2019


SURELY YOU JEST AND LUCK BE WITH YOU VER FINDING ONE

Maytag... | Answered on Feb 25, 2019


I would think something is blocking the intake or the pump rotor?

Maytag... | Answered on Jan 28, 2019


The door gasket may have to be replaced, especially if it has become hardened or cracked.

Maytag... | Answered on Jan 14, 2019


Fault symptoms point to a burnt out element, which will need to be replaced.

Maytag... | Answered on Jan 14, 2019


It is maybe a belt slipping or it needs new bearings
All best Clive

Maytag... | Answered on Jan 11, 2019

Not finding what you are looking for?
Maytag Logo

4,192 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Maytag Dishwashers Experts

Carmen Mikulic

Level 2 Expert

415 Answers

Mike

Level 3 Expert

4356 Answers

Marvin
Marvin

Level 3 Expert

84027 Answers

Are you a Maytag Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...