Magic Chef Refrigerators - Recent Questions, Troubleshooting & Support

No there isn't. Sometimes there is an overload switch, but it resets itself until it fails.

Magic Chef... | Answered 19 hours ago

same problem w mine and yes if you take the cover off the inside display you will be able to remove the board mine has a hole burnt in it.unplug harness w red blue and brown wires and jump and jump from brown to red unit will turn on you need a new board

Magic Chef... | Answered on Jan 23, 2019

si tiene un bot?n de descongelacion es un refrigerador est?ndar.
En teor?a el bot?n se dispara cuando se caiga todo el hielo del congelador
si no es as?,
a) "el bot?n" podr?a estar bloqueado con algo (suciedad,sulfato)
b) el control de fri? da?ado
espero te sirva el comentario

Magic Chef... | Answered on Jan 19, 2019

logic says you contact the sellers and get an rma and do it

Magic Chef... | Answered on Dec 28, 2018

Sounds like unit not getting cold enough to freeze ice. Maybe Blockage or leak in sealed system.

Magic Chef... | Answered on Oct 02, 2018

That clicking sound is the compressor trying to start, if it is less than a year old just call magic chef and they will replace the unit, if not the cost of a sealed system repair may make it not worth reairing

Magic Chef... | Answered on Sep 01, 2018

you are low on freon or the condenser fan is not working, call for service, this is not a DIY

Magic Chef... | Answered on Sep 01, 2018

are u saying u replaced the start relay? and capacitor? I would check the cold control thermostat as if its defective u will get no fan no compressor etc. u can also check the compressor itself by removing the relay and capacitor then using a multi meter to measure the run and start windings for ohms, measure separately then together and the reading u get when together should equal the readings of both separate measurements? give or take 5 percent. u test by connecting the multimeter prongs to the nutual and the run and the nutrul ( center prong) and the start prongs

Magic Chef... | Answered on Aug 06, 2018

Believe you need to change the start relay and overload, Sea Breeze

Magic Chef... | Answered on Jul 09, 2018

The red button is a circuit breaker and you are resetting it by pushing the button. Some circuit breakers of this type become unreliable and open the circuit randomly, often at some inconvenient time. Still, there could be a valid reason the breaker is popping.

Magic Chef... | Answered on May 23, 2018

Not finding what you are looking for?
Magic Chef Logo

1,233 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Magic Chef Refrigerators Experts


Level 3 Expert

1234 Answers


Level 3 Expert

83940 Answers

Lawrence Oravetz

Level 3 Expert

10502 Answers

Are you a Magic Chef Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides