HP LaserJet - Recent Questions, Troubleshooting & Support


http://vr2020.cn/support/t11523172-laserjet_p3015_error_59_30

https://printcopy.info/?l=en&mod=erc&brand=HP&model=LaserJet%20P3015&code=59.XY

Code

59.XY

Display

59.XY ERROR

Description

A temporary printing error occurred. • 59.30 = fuser motor start up error (M8002) • 59.40 = fuser motor rotation error (M8002) • 59.50 = main motor start up error (M8001) • 59.60 = main motor rotation error (M8001)

Remedy

59.30 and 59.40 errors 1. Turn the product off and then on. 2. Make sure that connectors J8002 and J1504 are fully seated on the ECU. 3. Use the COMPONENT TEST (in the DIAGNOSTICS menu) to test the fuser motor functionality. If necessary, replace the motor (M8002). 59.50 and 59.60 errors 1. Make sure that connector J1503 is fully seated on the ECU. 2. Use the COMPONENT TEST (in the DIAGNOSTICS menu) to test the main motor functionality. If necessary, replace the motor (M8001).

HP LaserJet... | Answered 11 hours ago


thisis the farmetter problem

HP LaserJet... | Answered on Feb 18, 2019


try finding a utube video on the subject there shud be vids on someone else who has done the fixing as well , anything else you need you can find it here>>www.discountbargainprices.com

HP LaserJet... | Answered on Feb 17, 2019


Download the required driver from hp.

HP LaserJet 1160... | Answered on Feb 14, 2019


Error 49 or 79 is a conflict from your computer or print driver. Turn printer off and cancel any and all jobs in printer queue.(via your computer) Unplug the USB or the network cable and power down your computer. Power up your printer, see if it comes to a ready state. If it comes to ready go to printer menu and print a report. If this prints fine, replug cable to printer, power up computer, and send another job to printer. A corrupt job or PDF is usually the culprit in this situation. Hope this helps.

HP LaserJet... | Answered on Feb 13, 2019


Determine the current firmware version 1. Press Menu . 2. Press the down arrow to highlight INFORMATION, and then press OK. 3. Press the down arrow to highlight PRINT CONFIGURATION, and then press OK to print. The firmware datecode is listed on the Configuration page in the section called Device Information. The firmware datecode has this format: YYYYMMDD XX.***.X. The first string of numbers is the date, where YYYY represents the year, MM represents the month, and DD represents the date. For example, a firmware datecode of that begins with 20061125 represents November 25, 2006. Download new firmware from the HP Web site To find the most recent firmware upgrade for the product, go to www.hp.com/go/ ljp4010series_software or www.hp.com/go/ljp4510series_software. This page provides instructions for downloading the new firmware version.

HP LaserJet... | Answered on Feb 12, 2019


Thank you for contacting FixYa with your printer inquiry.
It looks like a firmware upgrade was attempted and it failed in process. When the printer was restarted int prompted this error.
I have included a link to an HP Document that addresses this issue with steps and screen shots to walk you through the process. If you are still having trouble and this printer is under warranty contact HP Customer Service. They may be able to further assist you, send out a technician, or replace the formatter with upgraded firmware.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=130&prodSeriesId=3690646&prodTypeId=18972&objectID=c01574139
Hope this helps. Please keep us updated and remember to rate this answer.
TF

HP LaserJet... | Answered on Feb 12, 2019


It sounds like the printer needs to be cleaned. Begin with the careful inspection of the rollers.

HP LaserJet... | Answered on Feb 06, 2019


Its the first finger sensor right above the tray 2 that gets stuck. It should move freely.

HP LaserJet... | Answered on Feb 06, 2019


60.2
The tray 2 lifter-motor is not functioning.

1 Turn the printer off and then on.
2 If the error persists, turn the printer off.
3 Verify that the tray 2 lifter wire-harness
is full seated in its connector on the
dc controller PCA (location J93).
4 Replace the tray 2 lifter-driver
assembly. See Tray 2 lifter-drive
assembly.
5 Replace the dc controller PCA. See
Dc controller PCA.


HP LaserJet... | Answered on Feb 06, 2019

Not finding what you are looking for?

-6,501 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top HP Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Cindy Wells

Level 3 Expert

5761 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

HP Office Equipment & Supplies

  • Forum

View Most Popular

  • HP Office Equipment & Supplies
Loading...