HP Pavilion - Recent Questions, Troubleshooting & Support


http://www.topshareware.com/vga.dll-5.01.2600.0000-video-driver/downloads/1.htm

There you are.

HP Pavilion... | Answered 22 hours ago


Hello,
to restart your HP Assistant you must first sure that you have install it in your system then go to control panel then open HP Wireless Assistant then check the properties then modify it. Then press the button with an antenna with a wave at the top to enable your wireless connection. Make sure that you enable your wireless connection for you to have HP Wireless Assistant.

Thanks

HP Pavilion... | Answered on Jun 14, 2019


I am assuming you are wanting install this on a HP machine, so all you should need to do, is go to the HP website if you use the machine you want to install it on, the web site should be able to detect, your make and model, and if any software is missing it will direct you to the page where you can download the software, and install it in the same way you install any other application in windows.

HP Pavilion... | Answered on Jun 12, 2019


Probably too late for anyone to benefit from, but use the jumpers on the motherboard to reset CMOS. That's what worked for me.

HP Pavilion... | Answered on Jun 11, 2019


Bios update is like brain transplant do it wrong and everything is toast. So basically your lookin at a big paper weight.

HP DT PAVILION... | Answered on Jun 10, 2019


I found the solution - and implemented it, it works. The blue (ID) line needs to show 7.5v. The simple way to acheive this is to simply put a 47k resistor from the +19.5v line to the ID line. Apparently there is a pull down at the computer end that means it ends up at 7.5v.

I cut the cable about 6" from the old HP power supply. I then soldered a female power socket onto the loose cable and soldered the 47k resistor between the ID line and the +19.5 line. I then plugged this onto my two pin power supply and the plugged it into my computer. It works very nicely.

Not wishing to junk the HP power supply unecessarily - it was still producing the 19.5v - I then soldered a power plug onto that ignoring the ID line. That now works as well. It seems that the circuitry that provided the 7.5v ID voltage in the HP power supply became flakey. I could have just opened up the power supply (I have already done that) and disconnected the blue line from the circuit board and just tied it to the +ve line via the 47k resistor and then wrapped it with the usual insulating tape.

HP Pavilion... | Answered on Jun 09, 2019


1) connect to external monitor to see if it works. If it doesn't work, then its a video card on the motherboard issue.

2) If connect to external monitor works, then its the screen or screen connection on the laptop.

HP Pavilion... | Answered on Jun 07, 2019


If this is a Windows 8 upgrade, it's a common problem. First you have to ID the Unknown device in Device Manager with a yellow triange. Take a look at this forum: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/acpi-ven-hpq-amp-dev-0004/td-p/2537553 You can try this software:

HP Pavilion... | Answered on Jun 05, 2019


What program are you using to burn the DVD?
Are you SURE that you have a DVD-R or DVD+R drive? Go to the Hardware Profile to be on the safe side and click on the CD/DVD icon to get the details

HP Pavilion... | Answered on May 08, 2019


you'll need to contact aol support.

If you need further help, reach me via phone at https://www.6ya.com/expert/joel_63c670a84e9f6a97

HP Pavilion... | Answered on May 01, 2019


There is commercial programs like dvd region free
http://www.dvdidle.com/dvd-region-free.htm

15 day trial at
http://www.download.com/RioDVD-Region-Free-Player/3000-7970_4-10463982.html?tag=lst-1&cdlPid=10859532

HP Pavilion... | Answered on Apr 10, 2019


you will need something like "Vso DivXToDVD 0.5.2 software" tp convert from your current format to one which your "standard" DVD player will read.

See this Webpage for directions and download details

http://www.dvd-guides.com/content/view/98/59/

enjoy the show

HP Pavilion... | Answered on Apr 10, 2019


Outlook and Outlook Express both report that error number when they can't find or connect to your mail server.
Understanding what's happening is fairly easy. Fixing requires some additional information.

I'll focus here on Outlook Express, but similar steps are appropriate for Outlook as well.
Typically you'll see an error message much like this:
oemailservererror.png Unfortunately, many people seem to fixate on the error number at the end - 0x800ccc0d. While that can be useful, and it's easy to search on, they're missing all the additional information that Outlook is providing in the error. Specifically, this:
The host 'wrongmailserver.com' could not be found.
That's a big clue as to what's going on. Your email account is configured to retrieve email from the server 'wrongmailserver.com' (a fictitious server I made up for this example), and Outlook Express cannot connect to that mail server.
Step one? Make sure you can connect to anything else on the internet - any web page will do. Error 0x800ccc0d can occur because you're not connected to the internet at all, and visiting any random web page simply verifies that your internet connection is working.
If your internet connection is not working, that has nothing to do with Outlook, Outlook Express or error 0x800ccc0d. Your mail failure is just one symptom of not being connected to the internet.
If you are connected, step 2 is to validate your Outlook Express account configuration. Specifically, if you click on the Tools menu in Outlook Express, then click on the Accounts menu item, and then in the resulting dialog box click on the Mail tab, you should see something like this:
oeaccountsdialog.png "If the Incoming Mail (POP3): setting is wrong, then error 0x800ccc0d can result." If you have more than one account, you may see multiple items in the list. Click on the one with which you are having trouble and click on Properties. In the resulting dialog box, click on the Servers tab and you should see something like this:
oeaccountproperties.png Note the arrows pointing at the two instances of the mail servers you would be using: one for POP3 (incoming email) and one for SMTP (outgoing email).
If the Incoming Mail (POP3): setting is wrong, then error 0x800ccc0d can result. In fact, the error message you got originally, "The host 'wrongmailserver.com' could not be found." is telling you that the mail server specified here could not be contacted.
So, what do you do?
I can't tell you what this setting should be, because it varies from ISP to ISP. What I use is different from what you use. So, you'll need to double check the information you were given from your ISP to see what they said your mail server name should be. Make sure you've entered that exactly. In fact, it probably makes sense to double check your entire configuration while you're here.
It's also possible that your mail server may simply be down - the ISP could be having trouble, for example, or the ISP could have changed mail servers. You'll need to contact your ISP to determine if this is the case, and whether or not they have an alternative mail server you can use, or how long you might need to wait for things to be fixed.

HP Pavilion... | Answered on Apr 08, 2019


We are HP Printer Tech Support Team. HP printer tech support, can save your valuable time, when you spend your lots of time to repair your printer problems. SysTechConnect is one of the HP printer customer support providers which only believe in more than satisfaction of users by its better online support. You can also save your service cost by keeping get in touch with this cost-effective support. Contact us anytime. We are available 24*7.

Website: http://www.printersupportcontact.com/hp-printer

none-usb-ports-working-think-s-2euuwhqem4rnhfmx54lumcpr-1-0.jpg

none-usb-ports-working-think-s-2euuwhqem4rnhfmx54lumcpr-1-2.jpg

HP Pavilion... | Answered on Mar 27, 2019


The 0xc0000185 error simply means that the computer can't communicate with the CD drive. It could be due to a faulty CD drive or media, a bad connection, faulty interface, bad memory, power supply etc. You will need to isolate the problem further, why couldn't you boot normally? check the BIOS settings again and try clearing the CMOS memory correctly as described in the manual (just removing the battery may not be good enough).

HP Pavilion... | Answered on Feb 13, 2019


which email service you use go to it
type in your ID name & in the same menu box
look for CAN'T LOGIN TO MY ACCOUNT
and follow the prompts

HP Pavilion... | Answered on Feb 12, 2019


Definetly the ati one. 120 stream processors is really good and it has
direct x10.

HP Pavilion... | Answered on Feb 07, 2019


why not upgrade to SSD?
for amazing performance no matter what, its just price ,size issue, a vast sea of SATA drive exist and work.
desktop it is. sata 320GB HDD when new.
you do know that means the OS dead right ,stuffing in any new empty drive?
unless the old HDD is good and you clone it to say any SSD (if the OS infected,or corrupted then this cloning is doomed)
the only limits are old PCs limit to 2TB MAX. LIMIT.
not spam at all any top ssd brand is good. even intels.

BUY CRUCIAL SDD. Pavilion a6228x , max age 12 years https://www.crucial.com/usa/en/compatible-upgrade-for/HP-Compaq/pavilion-a6228x#SSDFilters

HP Pavilion... | Answered on Feb 07, 2019


Not necessarily. Most computers have extra power connector for modifications and expansions.

HP Pavilion... | Answered on Feb 07, 2019

Not finding what you are looking for?

-5,140 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Alun Cox

Level 3 Expert

2679 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

HP Computers & Internet

  • Forum

View Most Popular

  • HP Computers & Internet
Loading...