Water Filter & Cooler Repair Questions, Solutions & Tips - Vr2020

Water Filters & Coolers - Recent Questions, Troubleshooting & Support

Something is leaking and shouldn't be.

Water Filters &... | Answered on Aug 31, 2018

Vr2020 is unable to suggest sources for Hamilton Beach products other than Hamilton Beach

Water Filters &... | Answered on Aug 23, 2018

What have you checked so far ..........

Water Filters &... | Answered on Aug 20, 2018

Are you sure that the unit didn't blow its circuit breaker in the new location?

Water Filters &... | Answered on Jul 10, 2018

First, I'm not a Earmark tech.
* Contact your water provider for service.

*** The following is for information only ***
* common problems with priming bottom loaders. Here are some vids to help; https://www.youtube.com/watch?v=_ZV36EQnj4A
* Set up (more technical); https://www.youtube.com/watch?v=239zY93bYrg

Aloha, ukeboy57

Water Filters &... | Answered on Jul 04, 2018



We started getting a blinking light... indicating the jug needed replacement... after installing a full jug. The unit would cycle, then the red blinking light would come back on. Upon careful inspection of the feed tube and lines, it was realized that the plastic line on the intake of the pump body had been inadvertently pulled out just slightly (presumably from jostling the jug around during replacement). I believe that this breaks the seal the unit requires for suction, and caused the fault. I simply pushed the (white) plastic line back into pump body and heard an audible 'click'. Unit works fine now. I hope this helps, as these units are not exactly cheap.

on Jun 09, 2018 | Primo Grills And Smokers Primo...

manualslib... did resonate with your model... (you will have to look here... https://www.manualslib.com/m/myl1032s-b.html Hope this does it for you...

Water Filters &... | Answered on May 02, 2018

Please share the make and model of your filter.

Water Filters &... | Answered on Mar 28, 2018

The noise is normal during regeneration and draining.
You can manually set the regen clock to a different time.

There are Noises in My Culligan Water Softener Regeneration System Hunker

Water Filters &... | Answered on Mar 28, 2018

Make sure you have enough water pressure for the dispenser. Most RO water filter systems require at least 40 PSI line pressure.

Water Filters &... | Answered on Mar 28, 2018

Not finding what you are looking for?
Water Filters & Coolers Logo

703 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Water Filters & Coolers Experts

Brad Brown

Level 3 Expert

17490 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Tom Chichester

Level 3 Expert

47789 Answers

Are you a Water Filter and Cooler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides