Televison & Video - Page 3 - Recent Questions, Troubleshooting & Support


The Roku HDCP error code 020 is caused when the Roku player is not authorized to play certain content on your TV. This compatibility issue mainly occurs when you have faulty cables or an older TV. Whichever is the case, you need to troubleshoot the problem accordingly and then, start streaming content seamlessly on your Roku. For help on this Go Roku HDCP error, visit our website https://www.go-roku-com-hdcp.com/ right away or do give us a ring at our toll-free support number +1-844-576-1390 which is open 24/7
roku-hdcp-error-020-o3im5njoakbqdqyqrh2wzsei-2-0.jpg

Televison &... | Answered 18 hours ago


go to the Menu and you should find it.

Televison &... | Answered 18 hours ago


Power supply fault. Repair the power supply.

Samsung... | Answered 18 hours ago


There is a small spring in the VCR that helps open the door. When the tape comes up on the track it pushes on the spring. Sometimes they fall off. Or the tab that it leans on breaks off. In this case you can attempt to glue it back on but most likely it will fall off again. The door can come off if you need it to. You will have to take the cover off to do this. This will have no affect on using the VCR. It will still continue to work fine. If removed. This will help you get your tape back each time. I hope that this was helpful in some way.

Televison &... | Answered 18 hours ago


My tv has same problem. Sanyo - model: CE32LC81-B (very old)
5_18_2019_5_21_10_pm.jpg

Televison &... | Answered 18 hours ago


Could be a blown capacitor. If you're electronically inclined. Unplug the TV and remove the back plastic cover. Look on the circuit board for and bulging capacitors. Or little black spots near leads. If you find something like that. you will need to disolder the component and install a new one. I fixed a Panasonic that had a similar issue.

Sharp Televison... | Answered 18 hours ago


Usually there is a hold in the front that you can push in a paper clip to get it opened.

Televison &... | Answered 19 hours ago


probably a place in the Menu to do that.

Televison &... | Answered 19 hours ago


Sound more like to me that the power supply is going. Still a cheap fix. The board in the back has to be replaced. I am assuming that the TV is black for a few minutes before you see light on the screen. This would indicate that the backlight is not able to come to full brightness until the transformer has fully powered up. And that transformer is located on the power supply board. It should be about $45 to $65 for the board. It all just plugs in and a few screws. Minus the screws to the back of the TV. I hope that I was able to be of a help to you so you can keep the TV. It is worth fixing. Note that you can get parts for them and most other Tv's via the company that makes them.

Televison &... | Answered 20 hours ago


Yes it is. It's a cheep fix. The fans are on ebay. If you have the manual for the TV. Look in the specs for the TV and locate the fan. You will see the voltage and rpm of the motor. Most likely it will be a 12v dc fan. It has two to four screws holding the fan. And a small plug. I hope this helps you in some way. THE CB SHOP OF COLEBROOK NH. Via Facebook.

Mitsubishi... | Answered 20 hours ago


More info what's the make and model?

Televison &... | Answered 23 hours ago

Not finding what you are looking for?
Televison & Video Logo

648,181 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76046 Answers

Cindy Wells

Level 3 Expert

5865 Answers

Marvin
Marvin

Level 3 Expert

84619 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...