Televison & Video - Recent Questions, Troubleshooting & Support


The remote should be able to work with the TV.

Televison &... | Answered 1 hour ago


Hi Kathy,

Yes you can use the sat button with one of these codes:
004,008,009,062,068,069,074,075,077,089,163,165,

Good luck

Universal Remote... | Answered 1 hour ago


I have seen a video on google about how to get into my settings with not having a remote.

Televison &... | Answered 1 hour ago


  1. Power and switch on the Durabrand DVD player.
  2. Open the DVD disc tray tray or lid.
  3. Press Stop.
  4. Press 3 - 5 - 9 - 7 (3597 in sequence). Can be done on remote control.
  5. Hidden DVD Region menu appears. Select region 0 or 9 using up or down button on remote control.
  6. Press OK.
  7. Close the disc tray and press Standby on the DVD player front
The above unlock DVD player region code trick should works on models including Durabrand DVD-1000, Durabrand DVD-1005, Durabrand DVM1418c, Durabrand LCDTV *** DVD player model PVS 21175S1 and others DVD players from Durabrand.

If the above unlock region code hack doesn’t work, or if you’re using Durabrand Car DVD Player model PVS1966, Durabrand PVS1960, Durabrand PVS1680, Durabrand PVS1970, Durabrand PVS223, Durabrand STS75E, Durabrand Dual-7B or Durabrand Dual-7BL, try the following unlock code instead.
  1. Power on the DVD player.
  2. Open the DVD disc tray or lid.
  3. Press 8 - 1 - 3 - 2 - 8 (81328 in sequence) on remote control.
  4. In DVD region code menu, press Enter until come to region 9 (or 0)
  5. Press Play.
  6. Close the DVD tray or lid.
For Durabrand Dual-900, try the following DVD multi-region or region free unblock sequence instead.
  1. Press Open to open disc tray.
  2. Press Clear.
  3. Press 1 - 3 - 6 - 9 - 0 (13690 in sequence).
  4. Press Standby button. After pressing, the DVD disc tray will close and DVD player will switch off).
  5. Press Standby button again to power up the DVD player.
Note: To set back the DVD player to region 1 if you’re using above unlock hack, simply press 13691 in sequence. The 0 or 1, the last digit in the key sequence is actually the digit to determine which region code you’re going to set on the DVD player. You can set to other region code by changing the last digit to 2, 3, 9 or other valid region code number.
For Durabrand DP305, try the following DVD region code unlock hack instead.
  1. Turn on the DVD player.
  2. Press Open/Close button to open the disc tray.
  3. Press Setup.
  4. Press 8 - 8 - 8 - 8 (8888 continuously).
  5. Press Next.
  6. Go to “Version and select a region code. Select 0 for all region or 9 for region free.
  7. Press Play.
The below trick should be able to unlock the region restriction on Durabrand DUR1700 DVD player.
  1. Turn on the DVD player.
  2. Press Setup.
  3. Go to “Preferences”.
  4. Press Play.
  5. Enter 2 - 5 - 1 - 5 - 3 - 5 (251535 in continuous sequence of keys).
  6. Press Left, Down.
  7. The current region code will be displayed.
  8. Press 0 for region free.
Note that if you select “Region 0′ which allows DVD players to plays all DVD-Video discs from Regions 1-6, some DVDs which are incorporated with “Regional Coding Enhancement” or RCE protection system will refuse to play in such machine.

Jensen JR400... | Answered 3 hours ago


UNSCREW the FOUR (4) screws on the back panel (marked with an "S" next to their recessed holes.

Work with the panel screen-side up (ie on its back - we did it with the LCD on the bed), and just JIGGLE the stand back and forth until the screws drop out. This make take some doing, but using force is a no-no (as the screw mounts are only plastic). Obviously the screws MUST be undone, so just keep unscrewing them while someone else jiggles for you.

Thats it. The plastic cover (from the manual & warranty bag) covers the hole.

Samsung... | Answered 4 hours ago


THEN LOOK FOR YOUR REMOTE HARDER WE DID NOT LOSE IT FOR YOU

Televison &... | Answered 6 hours ago


XSMN - KQXSMN - Ket qua xo so mien nam hom nay. tuong thuat ket qu? Xo So Mien Nam (KQXSMN) truc tiep tu truong quay luc 18h15 chinh xac va nhanh chong. XSMN

Samsung... | Answered 7 hours ago


What model of TV?

Press the Input or Source button on the TV (side top or bottom of TV) until it reads TV or ANT.

Cheers,

Insignia... | Answered 7 hours ago


try taking batreries out of remote and restarting tv

Televison &... | Answered 8 hours ago


Fault with the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site either in Web View, on a mobile; or by a desktop PC. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Sony Televison &... | Answered 8 hours ago


Turn on your TV and press the menu button and Select Support, and then Enter.Choose the self diagnosis, then on your TV screen and then enter.Select Reset, then Enter.Enter your Security PIN numbers or number The factory reset screen will display a warning message on the screen of the TV. During the process the TV could turn off and then turn on and will display the setup screen then.

Samsung... | Answered 9 hours ago


Fault with the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site either in Web View, on a mobile; or by a desktop PC. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Panasonic... | Answered 9 hours ago


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ View the site by desktop or web view on mobile devices to see the "search box". Type in the brand name of your set in search box; to get gathered the related posts.

Televison &... | Answered 9 hours ago


Check the remote control for its infrared emission. Check it with fresh batteries. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about how to test a remote control..
http://electronicshelponline.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

Bell Televison &... | Answered 9 hours ago


Hello there,
You just bought a wrong DVD-player or DVD-disc for your country.Although I believe it is illegal you could try to 'hack' your DVD-player and make it region-free. A list of DVD-players that can be hacked you find here.http://www.videohelp.com/dvdhacks
Good luck and best regards, FriskyRThank you for using FixYa, please rate this solution 4 thumbs if it was usefull. If not, please let me know.

Televison &... | Answered 9 hours ago


What is brand name and model number of the device you have? Provide more details; please. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Televison &... | Answered 9 hours ago


If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts. Surf the site with patience. Surf the sites by type in the brand name to your set, in its search box.
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/
http://electronicshelponline.blogspot.com/

Wharfedale... | Answered 9 hours ago


Sounds like Fault with its main board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ . In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Samsung... | Answered 9 hours ago

Not finding what you are looking for?
Televison & Video Logo

652,432 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76332 Answers

Cindy Wells

Level 3 Expert

6099 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...