Science & Laboratory Repair Questions, Solutions & Tips - Vr2020

Science & Laboratory - Recent Questions, Troubleshooting & Support


They make test strips.

Science &... | Answered on Sep 11, 2018


The trouble is with the CPU. It needs to be replaced

Zeiss Humphrey... | Answered on Sep 05, 2018


Error 3 is a Door lock error and has nothing to do with the water sensor. Tighten the door down snuggly, but don't over-tighten. If it still doesn't work it may need a door rebuild or switch replacement. Call for service if it doesn't restart.

ESCHMANN Little... | Answered on Aug 09, 2018


Google (Olympus)(345483)(manual) without parens.

Olympus Science... | Answered on Jul 16, 2018


Error 2 on this model indicates that the imbalance sensor is tripped. If you run the unit with an empty rotor and it does not error, then it simply means that your load was imbalanced. Make sure to put vials into the unit opposite each other, as below.

If it displays "Error 2" with an empty rotor and you did not notice a vibration, then the imbalance sensor is broken and must be replaced. Do not attempt to run the centrifuge without the imbalance sensor, as serious injury may result.

I repair these machines, but you would have to ship it to me in Ohio, which would probably be very expensive.

Here is a rotor balance chart:
25820121-43so4jflcykttpeedfokpxwo-1-0.png

Eppendorf... | Answered on Jul 15, 2018


George tang ,,,, here is drive.. follow the link
download and run in your system
with regards
it will look like so

Aigo GE-5 Driver Created by Olli Niemitalo on 2014-01-31, last modified 2014-01-31
I bought an Aigo GE-5 microscope years ago. If someone needs, here is the driver for it.
GE5-mikroskooppi.zip
Thanks to Pauli for salvaging this from the CD my CD drive could no longer read.


http://yehar.com/blog/?p=3468

Science &... | Answered on Jun 23, 2018


Request the service manual directly from Abbott.

Science &... | Answered on Jun 21, 2018


i have the manual and the belt, pls contact at memoinstal@bol.com.br

marcelo

Zeiss Humphrey... | Answered on Jun 20, 2018


These equipments use a sbc492 by Aaeon motherboard, and usually they shows a message like "Cmos battery Low".These motherboards use an RTC M48T86PCI with a internal lithyum battery, and just replace that component.Other problems may occur, like damaged slots, and or oxidation, but generally the 486 architecture is a huge way to work,Only clean change the memory(dimm 128 x 100mh)and enjoy.A simple way is a replacement with a new one by Intel, still easy to find in some inventorys, i have many in USA who can suply.

hope to solved

Zeiss Humphrey... | Answered on Jun 20, 2018

Not finding what you are looking for?
Science & Laboratory Logo

2,371 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Science & Laboratory Experts

Tom Chichester

Level 3 Expert

47789 Answers

ray gallant

Level 3 Expert

53180 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

22486 Answers

Are you a Science and Laboratory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...