Photography - Recent Questions, Troubleshooting & Support

Black film as in underexpose, after you have them printed?

If you open a roll of 120 film:
Remove the little tape holding to the film.
Place film onto Film Spool Studs.
Pull film out from film leader and thread to Take Spool.
Turn until Arrow Line on film aligns with Start Mark of Film Holder.
Close film cover or back.
Advance camera to Zero (0). Now you are ready to shoot.
Just rememer what film speed your are using.

Hope they are helpful.


Holga Flash, 120... | Answered Yesterday

a) Please do not shout - it wakes the Mongoose.

b) Google the make and model followed by the word manual, then select the link most suited to your requirements.

Photography | Answered 2 days ago

Generally, you need to rotate the images on your computer before loading them to the frame

Photography | Answered 2 days ago

First thing to do is to post this query in a more appropriate forum - this one is to do with Photography, not hand luggage.

Photography | Answered on Feb 17, 2019

The most probable problem you're experiencing is a lens gear issue, but it could be as simple as dirt, dust, lint, or sand inside the lens assembly. You can try to spray some compressed air into the lens assembly in hope of freeing it, or you can gently bump the side of the camera. Aside from that, make sure the battery contacts inside the camera are clean. The following web blog talks about lens issues for mainly digital cameras, but most of the suggestions will apply to your SLR:
If nothing helps, run it by a local camera repair shop and get an estimate, or contact Olympus Support:
Good luck, and hope this helps.

Olympus IS-500... | Answered on Feb 07, 2019

First of all, you can download a manual from here.


Basically, with certain types of lenses you need to set the aperture ring on the actual lens to its minimum setting (f22 or f32). Once it is set here, the camera can then control the aperture. It's covered on page 16 of the manual.

Hope this helps,


Nikon N60 35mm... | Answered on Feb 07, 2019

figure out how of get a manual for it. oh and shut off your caplock too

Photography | Answered on Feb 04, 2019

When purchased, the locks are set on a factory default combination that you can change as often as you wish.
  1. Turn the number dials to the previously set combination, or to "0-0-0", the factory default combination for Samsonite luggage.
  2. Locate the reset button, usually placed to the side of the combination dials.
More items...

How to Reset a Samsonite 3-Digit, Built-in Combination Lock ' USA ...

Samsonite... | Answered on Feb 03, 2019

And how, exactly, does this query relate to Photography ?

You may find more help in the Office Equipment forum.

Photography | Answered on Feb 03, 2019

This is not a Bronica ETR question.

Bronica ETR-Si... | Answered on Feb 03, 2019

try the common things like 000 123 987 or anything you think you set it to- it may be hard to get into it while its locked but you can also use some strong flat material to slide into it and latch the code change pin- alternatively if yo just want your stuff out then smash it. good luck

Photography | Answered on Feb 01, 2019

You dont have the functionality on a smart phone to us the best software. Adobe makes some of the best, there are also camera company specific software that is very good. Canon and Nikon software is great.

Photography | Answered on Jan 31, 2019

Not finding what you are looking for?
Photography Logo

11,785 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Photography Experts

Brad Brown

Level 3 Expert

17978 Answers


Level 3 Expert

83959 Answers

Tony Parsons
Tony Parsons

Level 3 Expert

5577 Answers

Are you a Photography Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides