Ovens - Recent Questions, Troubleshooting & Support


go on line for finesse sewing machine and down load the repair manual for your machine.

Ovens | Answered 10 hours ago


Contact Blanco to request instructions.

Blanco Ovens | Answered 23 hours ago


the latch the hooks into the door is caught inside the slot where it locks into when in self clean,you have to move the latch,unplug it,look through the air vents or slots up above the door if you can get a screw driver in there try to move the latch or if you can get something down inside to move the latch,i used a plastic long wire tie to do this before,i slid the tie down around the metal hook part of the latch that locks into the door,and pulled it to the left and got the door to open,it got hung up in the hole and the door wouldn't open but what ever works you have to move the hook part of the latch to get the door open,you can try picking up on the door to see if you can get it open or you'll have to pull the oven out and take the top off to get at the latch,hope this helps

KitchenAid Ovens | Answered Yesterday


REPAIR IS NOT POSSIBLE BUT REPLACEMENT IS BUY A NEW SWITCH

Bosch Ovens | Answered Yesterday


I searched the internet looking for a manual but unknown if the manufacturer web site has on available.

https://www.gaggenau.com.au/appliances/downloads

Gaggenau Ovens | Answered 3 days ago


I have the same problem with a Kenmore oven. Looks like the oven walls have bent outward.

Ovens | Answered on Jul 01, 2020


WELL THEN TURN THE ONE THAT LOOKS LIKE A CLOCK AND SEE WHAT YOU ACCOMPLISH

Bosch Ovens | Answered on Jul 01, 2020


Have exactly the same situation. All the solutions I have seen talk about replacing the hinges or seal. But people report the same thing happens a month later. Looking hard at the door what it needs is something to pull it right at the top. So I installed a rare earth magnet from www.kjmagnetics.com I used part number BX884DCS which costs $4. It mounts with a couple of screws and I put it on the door a couple of inches down from the top.
Its possible that heat from the oven will kill the magnet over time but for $4 I can replace it for a lot less than hinges and it works great. The door closes more securely than it ever did when the oven was new.
Hope this helps.

Thermador SMW272... | Answered on Jul 01, 2020


My guess is the oven controls are smart enough to know something is not working, including the oven heating element, the oven thermostat, or the oven on switch. These are all electrical parts that are dangerous unless you have appliance repair knowledge and experience! You may be able to find a lightly used replacement for less than a service call.

Whirlpool Ovens | Answered on Jun 29, 2020


Look for an online appliance parts store. there are several and usually quiet helpful.

Ovens | Answered on Jun 29, 2020

Tip

Info on Parmco 5-function OV-1-6W-5 oven switch selectors ZX-851 and XPO33301060


I've written up my experience changing the Parmco 5-function oven switch selector here in case it helps anyone:

https://docs.google.com/document/d/1_arC4El5_N91pLyrchf9pklpGxjXje4i7KbCFzOqv0U

on Jun 25, 2020 | Ovens


Probably because the protection is the power breaker fuse and not within the oven.

Ovens | Answered on Jun 25, 2020

Not finding what you are looking for?
Ovens Logo

54,719 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Ovens Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Cindy Wells

Level 3 Expert

6114 Answers

Brad Brown

Level 3 Expert

18360 Answers

Are you an Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...