Food Mixers - Recent Questions, Troubleshooting & Support
Why is mi kitchenaid classic starts a too fast speed ?
If it is running too fast at start on low speed there are 2 likely causes. The speed control plate or the low speed stop screw are out of adjustment. If this problem happened instantly rather than getting slowly worse over a long time then it is unlikely to be this. The other cause is a faulty phase board, that is the very small PCB under the back cover at the very top. It has 4 wires coming off it. They are not at all expensive to buy and easy to replace. One screw holds it on and just the 4 wires to clip off the terminals on the black speed control plate.
on Oct 12, 2018
I bought a ice cream
Hi ROBYN, Happy New Year! First a couple of clarification questions: A) Was your ice-cream maker a Kitchenaid (KA) Ice Cream maker, too, and B) was your mixer purchased after 1990? If you purchased a KA Ice Cream maker and your mixer is less than 20 years old, according to KA, the Ice cream maker should fit all mixer produced after 1990.
If you have a different brand (not KA) of ice cream maker, then I’m afraid you just won’t just be able to replace the drive assembly, but you will also need the correct dasher (the scraper inside the freeze bowl), as such you probably would be better off purchasing a KA Ice Cream Maker, which would be compatible with your mixer. Of course if your mixer is over 20 years old, then even if you have a KA Ice Cream maker, it may not fit correctly anyway, which leaves you in a conundrum. Should you purchase a new KA mixer for your KA Ice Cream maker or do you purchase a new KA Ice Cream Maker to go with your current KA mixer produced after 1990?
You can download the KA Ice Cream Maker Use & Care Manual from the KA website at: http://www.kitchenaid.com/assets/pdfs/product/ZUSECARE/KICA0WH_Use%20and%20Care_EN.pdf
I wish I could offer you a better solution to use your new ice cream maker with your current mixer, but unfortunately I am unable to do so.I hope this was helpful, even if it doesn’t provide you the answer you were looking for. Good Luck, Howard, Burke, VA. If this solution was helpful though, please rate it. hslincoln
on Oct 04, 2018
Not finding what you are looking for?