Food Processors - Recent Questions, Troubleshooting & Support

Put the work bowl, lid, and pusher on one piece at a time - handle of work bowl faces the front of the food processor, hollow feed tube faces the back, and the sliding lock switch on pusher sleeve faces the front. Should turn on.

If it doesn't, test the motor - remove the work bowl and other parts completely. Plug the base in and turn it on, and use a pen to push in the dark grey or black button on top of the base - if it spins, the motor is still good - you may just need a replacement part. If it doesn't make a sound, it needs to be sent in to Cuisinart for repair.

Cuisinart DFP-11... | Answered 2 days ago

I need user manual of fx10 bajaj food processor.

Food Processors | Answered 2 days ago

Contact service engineer, it may require to replace it's carbon brushes

Kenwood Food... | Answered on Feb 15, 2019 good luck

Food Processors | Answered on Feb 13, 2019

I just ordered a drive belt from for Hamilton Beach/Proctor Silex Food Processor Type: FP03 Model: 702R for $7.99 + shipping.

Hamilton Beach... | Answered on Feb 11, 2019

Had the same problem - it wouldn't press down. The little white plastic things inside of the base that go up and down when the cup is pushed down, were stuck. I think that something leaked into them so they wouldn't slide easily. I wiped out the inside of the base with a damp cloth and then I put a drop or two of WD40 at the top of the white plastic pieces and rubbed it up and down the length of all 3 of the white plastic pieces (this being done with the base lying on its side so the WD40 doesn't drip down into the mechanism). Then, with base upright, I used a screwdriver to try to manually push the white plastic pieces down. It worked. Of course before doing any of this - be sure the thing is unplugged (duh!).

As Seen On TV... | Answered on Feb 11, 2019

The magnetron has a 100% duty cycle on full power and reduces to 20% on low power. That means that it produces full power for 20 seconds and no power for 80 seconds on low power during the cook cycle.

Russell Hobbs... | Answered on Feb 10, 2019

Check with an appliance parts supplier.

GE Food... | Answered on Feb 09, 2019

Not finding what you are looking for?
Food Processors Logo

5,945 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Food Processors Experts


Level 3 Expert

83959 Answers

Ross Keen

Level 3 Expert

1336 Answers

john h

Level 3 Expert

19466 Answers

Are you a Food Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides