Crafts & Hobbies - Recent Questions, Troubleshooting & Support

Sometimes the rubber nozzle removes easily and once removed the metal nozzle behind the rubber can be unscrewed with a wrench or pliers.
With the nozzle removed and the glue gun is hot it should be possible to push the eraser and the metal ferrule back through the heated tube of the glue gun.

If the nozzle can't be removed it poses some difficulty as a rod or stiff wire will be needed that will go through the hole in the nozzle to push back the eraser. It will probably be a fiddly job and it might not be possible to push the eraser right out but if it can be moved back a little it could be possible to hook it out with the same wire after bending it so there is a small hook on the end.

You made an honest mistake and your parents shouldn't be angry.

If you find you can't remove the eraser; if you have a car repair shop nearby, I am sure you will find help there. Once hot a quick blast of compressed air through the nozzle should clear everything from the heated tube.
Good luck!

Crafts & Hobbies | Answered on Jun 15, 2020

Try several applications with paper towels and a WARM iron. The heat will cause the wax to soak into the paper towel.

Crafts & Hobbies | Answered on Jun 10, 2020

Crafts & Hobbies | Answered on Apr 21, 2020

You can perform a Hard Reset on the Cricut Expression 2 by following the steps below: Power off the Expression 2 machine. Hold down the magnifying glass, pause, and power buttons all at the same time.

Ensure that a cartridge is loaded in the machine, as the Load Mat button may not function if a cartridge is not loaded. ... The Cricut may think that the mat is already loaded in the machine. If this does not help, proceed to 4. Press the Reset All button to clear all commands and then press the Load Mat button again.

Crafts & Hobbies | Answered on Apr 19, 2020


Crafts & Hobbies | Answered on Apr 13, 2020

chec h with lionel online search or a model railroad club/forum

Crafts & Hobbies | Answered on Apr 04, 2020


Crafts & Hobbies | Answered on Apr 01, 2020

jag vet inte du f?r fr?ga n?gon annan

Crafts & Hobbies | Answered on Feb 04, 2020

Hello, Donna -

The number 42733 is connected with the Bucilla cross stitch kit for the "Mad Bluebird".

Therefore, you need to contact the Bucilla company regarding the incorrect pattern.

The parent company for Bucilla is Plaid Enterprises. This is the link to the Plaid Enterprises Contact Us page:

Note: has no affiliation with Bucilla, Plaid Enterprises, or any other handicrafts business.

Best wishes.

Crafts & Hobbies | Answered on Dec 27, 2019

Yes you can. You need a cable that will go from your machine to your computer. It's usually just a simple printer cable. Then you have down download some software from called Cricut Craft Room. Then you should be good to go. :)

Crafts & Hobbies | Answered on Dec 17, 2019

Has it not been used in a while
Try steel wool on the tracks to remove oxidation

Crafts & Hobbies | Answered on Dec 02, 2019

Contact Adtech by telephone to request assistance, or purchase in a retail store.

Crafts & Hobbies | Answered on Nov 25, 2019

Please understand that you are talking to regular people who offer advice, not to the company that made your product. Contact the seller of your item directly for their return policy

Crafts & Hobbies | Answered on Nov 02, 2019

Not finding what you are looking for?
Crafts & Hobbies Logo

3,419 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Crafts & Hobbies Experts

ray gallant

Level 3 Expert

68239 Answers

Tom Chichester

Level 3 Expert

55379 Answers

Bill Boyd

Level 3 Expert

53812 Answers

Are you a Craft and Hobby Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides