Water Sport Repair Questions, Solutions & Tips - Vr2020

Water Sport - Recent Questions, Troubleshooting & Support


No actually it is better to paddle board on less choppy water and flat water is preferred when beginning to practice your skills.

Water Sport | Answered on Oct 01, 2018


clear it is in mm. or cm.?

Kwik Tek Water... | Answered on Sep 22, 2018


I am unsure of which model you have, but I would think that the insoles can be washed with water and dish soap to clean them up. Removing the insoles at the end of the day can also help them to dry out and get rid of the smell.

Teva Dozer 3... | Answered on Jul 30, 2018


For a 2001 Yamaha F115 4 stroke use NGK Plugs LFR6A-11 gapped between 0.039 and 0.043

Yamaha 12V Air... | Answered on Jul 10, 2018


you have fouled spark plugs change them all fixed all the newq yamaha sare doing it it is the in thing to do

Yamaha 12V Air... | Answered on May 08, 2018


  • Get some food coloring...
    • Squeeze bottle works best
    • Or pool leak detection Dye
  • get some good goggles...
  • get in the pool, start at one specific area...
  • and take a deep breath...
  • Now follow all the seams 1st, squeeze some dye in a suspected area and watch. If the dye gets sucked in, there's a leak! If it just puddles and hangs around, keep checking somewhere else.
  • Once a lead IS found, vinyl liner pool patch! Can even be used under water.

Amazon com Vinyl liner pool patch Patio Lawn Garden


Leakmaster Pre Filled Dye Tester For Finding Pool Spa Leaks

GLI Pool Liner... | Answered on Apr 17, 2018


If you're new to the sport, this is the place to start. We've narrowed down the selection to our five top picks for beginning to intermediate stand up paddlers, and we've created a handy guide so you can get some clarity and understand exactly what you're getting before you decide on a board.
Click Here : 5 Fishing Kayaks For Beginners: Finding The Best Fishing Kayak
Of course, these are not the only good boards out there, but we think this small pool of boards covers the range of options, and we're confident in the quality of these boards.
If you read nothing else before buying your first SUP, follow this guide and you'll end up with a board that's right for you.
QUICK ANSWER: THE BEST BEGINNER STAND UP PADDLE BOARDS

  • Isle 10'8" Soft Top Foam SUP.
  • California Board Company (CBC) Stand up Paddle Board.
  • Isle 10ft Inflatable Stand Up Paddle Board.
  • Tower Adventurer 2 10'4" Inflatable SUP Package.
  • Tower Adventurer 9'10" Inflatable SUP Package.
Click Here : Fishing Kayak Care: A Brief Guide To Beginners

padadl-0vdqznznnrh3ubwjaxqyb15h-2-0.jpg

Water Sport | Answered on Apr 12, 2018


Hi, Deb This is a rather bizarre question coming from a woman and I normally don't fool with such nonsense, but in my humble opinion, I would go with the bust and hip size. Good luck and have a wonderful day.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Water Sport | Answered on Apr 06, 2018


Did you tune the carburettor to the engine correctly. It there a fuel flow issue ...

Yamaha 12V Air... | Answered on Mar 04, 2018


Here are a few places:
https://www.kingofwatersports.com/category.do?category=14&path=kitesurfing-c14.html

http://www.kitesurfwarehouse.com/sale.html

http://www.kite-line.com/

Water Sport | Answered on Feb 06, 2018


Most paddle boards are made with traction pads attached to the top of the board, these should never be waxed. Boards that do not have the traction pads should be lightly covered with a base wax.


Water Sport | Answered on Feb 05, 2018


You can contact the store where you purchased your printer. Either you should try amazon store to collect your 3d printer parts. Specially for PLA filaments you should try 3D Printing parts supplier, because they provide various types of PLA filaments like -
  • Ultimaker 2 PLA Filament (
    flexible white,red,transparent,blue,ultimate blue and others)

SainSmart 3mm... | Answered on Jan 12, 2018


You must try to crank it by hand ,remove spark plugs so there will be little compression and then try to turn the motor it should turn without to much force this will indicate the motor has not seized when hooking up a jump start do not connect both leads directly to the battery ! the red + lead should connect to the red+ on both batteries but the neg lead - should not go to the battery post but to a ground usually directly to the metal engine cover or you can damage the battery !

Yamaha 12V Air... | Answered on Nov 25, 2017

Not finding what you are looking for?
Water Sport Logo

804 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Water Sport Experts

Marvin
Marvin

Level 3 Expert

83036 Answers

Bill Boyd

Level 3 Expert

53720 Answers

Tom Chichester

Level 3 Expert

47789 Answers

Are you a Water Sport Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...