Question about Washing Machines

1 Answer

I have a Maytag Model A412, series 11 washing machine. After the machine fills with water the machine appears to start its cleaning cycle but the agitator doesn't work. The water starts & the motor appears to run but No agitation?? The belts are fine and the rinse & spin cycles work fine... What am I missing?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

If this is a two piece agitator,it should behave like a ratchet turn freely clockwise and catch counter clockwise if it doesn't catch the agitator "dogs " are shot this is a verry inexpencive repair

Posted on Jun 09, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have may tag wash model nu mav5920eww i just hooked it up tried reg wash it filled with water then would not continue to wash went to pause mode


Maytag & Whirlpool washer diagnostic - Fills with water then ...

? 3:03
https://www.youtube.com/watch?v=71zySSScDPE
Jul 11, 2013 - Uploaded by ApplianceVideo.com
Troubleshoot your trusty Maytag Washer that has some of the ...washer diagnostic - Fills with water then cycle stops - LAT8014AAE .... Not agitating Maytag 2 belts top load washers - Duration: 26:55. by theapplianceman 23,820 views. 26:55.Washing Machine Keeps Filling With Water and Will Not Agitate ...

Maytag top loading washing machine stopped working & filled with



Dec 02, 2015 | Maytag MAV5920E Top Load Washer

1 Answer

My maytag quite series 100 _ fills with water starts running cycle but stops after about 20 sec _ it does this 3 times then shuts completely off


Sounds like the timer could be a issue . or motor running to hot clean all under and behind make sure no dust ..UNPLUG UNIT FIRST ,....

If you need further help, I’m available over the phone at https://www.6ya.com/expert/richard_b59056c0c62ecb00

Sep 28, 2015 | Maytag Washing Machines

1 Answer

Maytag dependable care LAT8435AAE fills with water then quit. Has power but will not start in any cycle


You need a new timer. It's an easy repair ...

http://www.repairclinic.com/Maytag-Washing-Machine-Model-LAT8435AAE-ID-90821-Circuit-Board-Timer-Parts

Jul 19, 2011 | Maytag Dependable Clean Top MAV5920EWW Top...

1 Answer

Maytag washer will not agitate


A Maytag A412 is well over 20 years old....
Best guess is a corroded upper drive shaft, the one that the agitator is mounted on. Certainly it can be called a transmission problem.

Jun 28, 2017 | Maytag Washing Machines

1 Answer

Maytag A412 series 11 just overflowed water everywhere.


This is caused by a faulty water level switch. It is a diaphragm-like device that has a small clear plastic tube attached between the switch and the bottom of the washer's outer tub. As the water level increases, so does the pressure on the air in the plastic tube and when it reaches a certain level, it activates the switch to turn off the water and signals the timer to start the appropriate cycle. Check for any obstructions in or damage to the plastic tube. The switch can be tested using a multimeter or ohmmeter. Check for continuity. A lack of continuity indicates a faulty switch. Hope this helped and best wishes.

Aug 29, 2009 | Washing Machines

1 Answer

Will not start wash cycle


Sound like the lid switch has went out , you should hear it click when the lid is close to an inch of being closed , they are un-expensive and easy to replace and they go out often from use. Easy to find online with your real model number located under the lid.
Phil
The washer with the grind noise is a main bearing going out and may be covered under warr. through maytag.

Apr 11, 2009 | Maytag Atlantis MAV7000

1 Answer

Maytag Washer Legacy series When cycle starts the cold water just trickles in and takes a long, long time to fill. The faucet valve is fully open. When I unscrew the hose from the machine and turn the...


Remove the cold hose from the machine.
Look inside the inlet you removed the hose from, there will be a screen.
Take it out, clean it, and replace it.
Problem solved.

Feb 22, 2009 | Maytag Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

428 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Marvin
Marvin

Level 3 Expert

83810 Answers

Brad Brown

Level 3 Expert

17764 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...