Question about Televison & Video

2 Answers

No signal from dstv decoder to coax.cable,but it shows scanning on tv monitor.

Posted by on

  • 2 more comments 
  • Anonymous Mar 13, 2014

    my dstv is just shows scanning on the tv but does not play

  • Anonymous Mar 19, 2014

    audio cable to dstv decorder

  • franciscovinganco
    franciscovinganco May 12, 2014

    my dstv is just shows scanning on the tv but does not play

  • franciscovinganco
    franciscovinganco May 12, 2014

    no signal my decoder PVR 3001 is just shows scanning on the tv but does not playAdd a Comment

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

No signal for dstv for my decorder pls help me.

Posted on Mar 20, 2011

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I HAVE A DECODER OF DSTV, BUT THE IT SHOW RED, ORANG AND GREEN LIGHT CONSTAND. AND THERE IS NO PIC ON THE SCREEN.

Posted on May 10, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dual view DSTV decoder stuck on scanning searching for signal


I Was watching generations all of a suddenly my decorder starts scanning continuosly

Mar 19, 2012 | Acer Aspire Televison & Video

2 Answers

Dish Satellite recently installed in my home supporting several tvs. MY JVC TV model LT32E478, designated as TV1, does not recognize any channels during program scanning. As a result, the timer on/off...


Hi mfaille
I`m going to help you with your setup but first;
Which connection are you using from the sat receiver to the tv?
Coax / standard rg6 cable?
Did you try to manually add(in the menu/tuner setup/find channel/add) the channel you need ?

May 17, 2010 | JVC LT-37E478 TV

1 Answer

Decoder keep scanning


well, firstly. u have a sat finder!! great!! now lets see if i can teach u how to use it, when you hook it up there will always be some sort of signal, (other electronic waves in the air) the best way to check is to put ur hand in front of the LNB (the square box in front of the dish) if he signal goes down, the signal was fine to begin with, if it goes up, the dish is out, if nothing happens... dead LNB, which in my experiance, the most likely cause, dont for get to reset your decoder once you have solved the problem.. good luck

Apr 27, 2010 | DISH Network DVR-625 DTV Receiver /...

2 Answers

My tv wont show any cable when you hook it up to the coax


Hello. The problem usually is the cable itself. In order to have a signal you must have a paid up account at the cable company and also a continuously connected line. Call the cable company to see if they are infact sending a signal to your address. If they are, then trace the signal through the house to be sure it is actually coming to your tv.

Apr 18, 2010 | Televison & Video

1 Answer

All we are getting is a pixilated screen and no sound. Dvd's play normally


OK. This should be simple. If you are using a TV with a built in digital tuner like all the HDMI ( High Defintition Media Interface) flatscreens then you probably need to go through your set up menu on your Digital TV and select Initial Setup / Channel Input / Cable / Satellite if coming directly from a dish on 75 Ohm Coax / or Cable if coming directly from the outside 75 Ohm coax with analog signal. ( When I say DIRECTLY, I mean you are not going through any boxes and changing or passing the signal). All satellite direct connects are digital and all satellite converter boxes have multiple out puts these days. There is an HDMI output for high def and low def analogl to digital (A/D) signals coverted within the TV, sometimes there is a DVI or even a USB out put connector...and there is a 75 Ohm coaxial RF cable connection for all the old schoolers who do not have a widescreen digital TV. RF means Radio Frequency and uses Radio Frequency Channels 3 and 4 at the bottom of the RF band around 56 MHz to which any TV with an Analog Tuner can use. In the old days this is what was used for the connection to the TV from the cable boxes because our TVs did not have the capability of decoding analog pay channel signals, hence the little black boxes sold and used ONLY by cable thieves and not any of us here on fixya. For starters, let's make sure you are using your high def, dvi. or some format of digital It sounds like your TV is set up to search and code digital signals but is looking for the wrong carrier frequencies, meaning it is either looking for decoded digital satellite box signals, digital broadcast ( New Digital TV received via an Antenna). Once your TV scans for channels in the cable mode they will be memorized and available on your channel up / down keys and Favorites. (FYI t will scan for both digital and analog channels on antenna mode). Repost if you have troubles or refer to your users manual.

Aug 17, 2009 | Televison & Video

1 Answer

I have my cable coax connected to the UHF, VHF, CATV input. If I connect cable to Digital Antenna In input and do channel search will I receive local digiatal broadcasts or do I need to split the coax to...


You need to put a compatible cable decoder box between the cable and TV as the sanyo will only decode analogue cable signals via the catv UHF vhf input
the digital antenna in is for digital air broadcasting signals only

Jul 25, 2017 | Sanyo HT27546 TV

1 Answer

Need to connect my DSTV decoder through my sony amplifier (5.1) not sure of a the cabling or the connections, does someone perhaps ahve a wiring diagram to connect TV, dstv decoder and sony 5.1 amplifier?...


well this is easier than you think, get yourself a set of RCA's (the red and white and yellow cables that DVD players come with) look behind your decoder and place them colour to colour, then behind your Amp you will read (TV IN) do the same, then with just one yellow RCA plug it into (monitor) that one will then go to the (AV input) behind your TV.. And presto!!! now set your amp input on the remote to TV and your off!! good luck

Jun 29, 2009 | Fujitsu Siemens PlasmaVision P42VHA40...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

1,916 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76001 Answers

Cindy Wells

Level 3 Expert

5680 Answers

Marvin
Marvin

Level 3 Expert

83810 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...