Question about HP Office Equipment & Supplies

1 Answer

What is the reason for cool down mode for HP laser jet pro 200 color M251nw

Posted by migara perera on

1 Answer

JonSnell Electronic

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Vr2020 Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • HP Master
  • 31,200 Answers

That stops the heat generated by the drum heater from burning the drum as the fan carries on to cool it down.

Posted on May 04, 2019

5 Related Answers


john doe

  • 149 Answers

SOURCE: HP color laser 4600dn FAN noise

Yes this is normal. Everytime someone prints, the printer exits power saving mode and the fan will stay on. If you leave it on and don't print to it overnight, the fan would shut off in the mornig. But you probably turn the printer off everynight and are printing all day, so you don't really have to expectthe fan to power down unless its not being used for an long period of time idleing.

Posted on Jul 18, 2008


  • 327 Answers

SOURCE: hp laser jet 2840 engine error

its the problem of the spinning wheel which pulls the paper that is called engine and that is either getting blocked by any dust particles or got broken internally and has to be cleaned or replaced to make it proper.

Posted on Dec 15, 2008


Leroy Elliott

  • 2120 Answers

SOURCE: Color Laser Jet 3800 leaving roller marks on paper

Pull out the fuser at the rear of the machine.

Posted on Feb 07, 2009


  • 150 Answers

SOURCE: just bought an HP color laser Jet CP2025. How do

Hi I think it calibrates when you turn it on

Posted on Jan 22, 2010


  • 6 Answers

SOURCE: HP Color laser jet 4700n 49.3048 service error

The problem is usually caused by printing a PDF file with fonts/page size/ page formating errors which will cause the printer to display the 49.3048 error. The only way to use the printer is to POR or recycle the power and delete the print job from the server or spooling device and cancel it on the printer before the offending command is issued to the printer again. You can try updating the firmware to the latest version 46.140.5 from the HP website. MIke L.

Posted on Jul 20, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Is there any quick fix for cool-down mode of color laser printers ?

Simple answer is no, and even if you could - you should not. The cool down mode is there to protect the fuser from overheating and burning out. A damaged fuser is not replaceable so the machine would become worthless scrap. If the cool down mode is kicking in too frequently it might indicate that the cooling fans are clogged with fluff or there is not enough space/airflow around the machine to provide adequate cooling.
Make sure there is at least a couple of inches free air allm round the machine and from time to time put a vacuum cleaner nozzle to the fan vents to clean them out.

Dec 18, 2017 | HP Office Equipment & Supplies

1 Answer

LaserJet Pro 200 M251nw - My color printer keeps printing every page with colored bands. Below is what I have done to troubleshoot this printer: a hard reset, printed a cleaning page.

Are you using genuine HP cartridges? The generics have always given me trouble & I don't even bother anymore, no matter how good the deal seems.

Oct 24, 2016 | HP Color LaserJet Pro 200 M251nw

1 Answer

MY hp laserjet 200 color m251 pcl 6 do not print full copy of A4 when printing via internet or wireless pls, i need a setting to make it print full copy . thank you.

I would check to ensure that the page size of both the driver and the printer are set to A4 and not letter. Most HP's will auto sub letter for A4 but if driver thinks paper is letter when it is actually A4 then the printout will not match.

Sep 16, 2016 | HP Color LaserJet Pro 200 M251nw

1 Answer

Have a hp laserjet pro 200 m251nw. Keeps getting paper jam message, but there isn't any paper jammed. Need a fix, please.

Lynne there may not be a full sheet of paper jammed, but a small piece could e under the sensor. get a can of compressed air and blow out the entire paper path.

good luck!

Sep 08, 2016 | HP Color LaserJet Pro 200 M251nw

1 Answer

Why is it printing magenta lines?

Try a different toner cartridge, likely a defective cartridge

Dec 12, 2015 | HEWLETT PACKARD - LASER JETS New - Hp...

1 Answer

Hp laser jet 300/400 10.1000error

10.10 error means it does not recognize the chip on the cartridge or that the seal is still in cartridge need new cartridge

Feb 24, 2015 | HP LaserJet Pro 400 color M451dn - Printer...

1 Answer

My HP Laserjet pro 200 is showing a 10.000 memory error. I have replaced the cartridge with another brand and it doesn't like it. I dont want to use only HP cartridges but need to know how to reset the...

The 10 error indicates that the chip on the toner cartridge is not being read. Could be defective. Get the dealer you bought the cartridge from to replace it.

Feb 06, 2015 | HP Color LaserJet Pro 200 M251nw

1 Answer

My hp keep on displaying cool down mode how do i remove this setting

My Hp laserjet 100 color mfp m175a keep on displaying cool down mode. how do i remove this setting?

Feb 14, 2013 | HP LaserJet Pro 100 color MFP M175nw -...

1 Answer

Software won't load says my os is out of date

which os are you using? as this printer supports only win xp, vista, win7, win 8 and mac..

Feb 03, 2013 | HP Color LaserJet Pro 200 M251nw

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

488 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts


Level 3 Expert

13434 Answers


Level 3 Expert

1997 Answers

Cindy Wells

Level 3 Expert

6099 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides