I have a General Super GS70V2 washing machine, once I press the start button error ocur ‘EA’. Can you tell me what caused of that error?

Run the machine empty to see if you can clear some of the soap residue, E-4 is "suds lock" error and is usually due to using too much detergent.

I have super general washing machine model is sgw 620 this machine coming error E5

Juveriya, Below are video links on how to use wash machine.
press the helpful button and follow me on fixya for more tips and info

How to How to Use the Washing Machine

https://www.google.ca/url?sa=t&rct=j&q=&esrc=s&source=video&cd=4&cad=rja&uact=8&ved=0ahUKEwiqvuTU4PfKAhVCXh4KHVemB_oQtwIIJDAD&url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3D33H0iMkbFcY&usg=AFQjCNFrbbUY8mMFFmtuf9fGYxS1l-rYUQ

https://www.google.ca/url?sa=t&rct=j&q=&esrc=s&source=video&cd=10&cad=rja&uact=8&ved=0ahUKEwiqvuTU4PfKAhVCXh4KHVemB_oQtwIINzAJ&url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DNsq9ibSedRg&usg=AFQjCNH39tw0WUQM8HME7n9aji4Ca395ZA

https://www.google.ca/url?sa=t&rct=j&q=&esrc=s&source=video&cd=7&cad=rja&uact=8&ved=0ahUKEwiqvuTU4PfKAhVCXh4KHVemB_oQtwIILTAG&url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DgqQHhSRcIfs&usg=AFQjCNGxyw7t7-4ODHXjJqIIbewvKD2CWA

A tE error code on the display of the washer indicates a heating error, usually caused by a faulty thermistor.

1. Unplug the washer from the power outlet for 10 seconds.
2. Plug the washer back in and press the POWER button and then the SPIN SPEED button until No Spin is selected. Press the START/PAUSE button.
3. Once the washer has drained, restart the wash cycle.
4. If the tE error code appears again, close the water taps and unplug the washer. The washer will require repair service.

my washing machine super general sgw7100 has error E-62! how i solve this problem?

E20 is a general error code to get to the real problem try this.. Reading ErrorCodes 1. Wake the washer by pressing any button. 2. Wait 5 seconds. 3. Press and hold

E20 is a general error code to get to the real problem try this..
Reading Error Codes 1. Wake the washer by pressing any button. 2. Wait 5 seconds. 3. Press and hold the START/PAUSE and CANCEL buttons simultaneously. As long as the buttons are held, the failure code will appear in the display as an “E” followed by two numbers, a number and a letter or two letters. The control will beep and the Door Lock, Wash, Rinse, and Final Spin indicator lights will flash. let me know what code come up... hope it helps

E20 is a general error code to get to the real problem try this..
Reading Error Codes 1. Wake the washer by pressing any button. 2. Wait 5 seconds. 3. Press and hold the START/PAUSE and CANCEL buttons simultaneously. As long as the buttons are held, the failure code will appear in the display as an “E” followed by two numbers, a number and a letter or two letters. The control will beep and the Door Lock, Wash, Rinse, and Final Spin indicator lights will flash. let me know what code come up... hope it helps

Hello Woolfmoon.Despite the fact I have long since thrown away all my documentation on this machine since is an analog machine and is quite old (but a good machine),and despite the fact that I cannot tell you the entire specifics of that particuliar erroe code because I dont have the manual,and despite the fact that I am graded on how well I help you out and "FIXYA", I will give a decent accessment. SC 544 has to do with the fuser. A temperature error ocurred (under/over.....time frame). Because of the intense and potentially dangerous heat that is intentionally generated @ the fuser there are many aspects of the fuser's characteristics that are monitored. Even general power conditions in the copier's enviroment can cause the safety monitors related to the fuser to generate an error as the safeguards are very sensitive. You can reset the code in the event it was generated erroneously or the problem has been resolved. Your copier has to believe that a "technician" fixed the problem so I will tell you how to do that. Press "clear/modes(yellow button) , then press the numbers "1 0 7" and then press the round orange stop button and hold it down until you see the the display change and begin to flash. For example the display area that would normally show you the number of copies you had requested should be flashing if you had successfully entered "service mode". So to be nore clear.......use your index finger as your brain and press CLEAR/MODES then 1 then 0 then 7 then hold down orange start button foe several seconds till the display changes. THEN....... :-)........turn off the main power (if you are in doubt unplug that baby). This will tell the copier to chill out and try to reboot again as if nothing was ever wrong. But if the problem still exists the copier will shut down again and give an error code. If that occurs you have a genuine and potentially dangerous problem in the fuser. I hope I helped a little, and wish to have helped you alot. Take care. Let "Vr2020" know if I was of any help at all please.............SPINAL

Try pressing the "on" and "start" button together for over 5 seconds..............or till the display vanishes. You will tell me the result...............vote too.