Question about The Watches

Open Question

Hi, My fibit watch does not reflect the current day and it is counting steps from the previous day. It has not set back to zero. Thanks, Ashika

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

jerryg50
  • 1690 Answers

SOURCE: Small dial on the watch face that counts the minutes won't return

Check in the instructions if there is a way to re-sync the hands. For some models of watches the hands are able to be calibrated.

It is also possible that the watch has a problem. Either the dial hand is not properly seated on to its axel, or the drive gear that is under the axel skipped a tooth. You will have to find someone who can service watches to fix this for you.

Jerry G.

Posted on Nov 21, 2008

  • 1 Answer

SOURCE: Fossil JR9589

(I'm dutch, so I'll try in my best englisch)

I don't know if you still have the problem, but what you should do is te following:

* pull out the knob (2 times) and turn anti-clockwise to change the time
* keep doing until it's 24.00 (midnight) and you day change's to the UK (!) day.
* push back the knob (1 time) and change the day to the FRANCE (!) day by turning anti-clockwise
* pull out the knob again and turn anti-clockwise to change the time until 03:00 (midnight)
* you see the then change the day back to the UK day

So, every night at 00:00 the day changes to the FRANCE notation and at 03:00 it then changes to the UK notation, so you can enjoy this setting during the day.

Good Luck.
Also owner of JR9589 watch.

Posted on Jan 02, 2009

  • 65 Answers

SOURCE: My sportline watch resets itself during exercise

I don't know this watch personally but it sounds like it may be a short circuit or maybe one or two of the buttons may be being activated during a particular movement. I'd recommend you take it to a watchmaker for diagnosis.

Posted on Jul 30, 2009

  • 1 Answer

SOURCE: Calrie count stays at zero

I had the same problem and found that the chest strap wasn't tight enough to get a good reading. If that doesn't work, you might have to send it in to have the battery changed. Search for a Polar authorized service center. It gives you some troubleshooting tips too. Good luck.

Posted on Dec 03, 2009

  • 1 Answer

SOURCE: Date setting of Frederique constant

hi
never change week or date when day is on "sun" or "mon" also never change date or week or day when time is between 9 pm and 5 am.
to change day, move time back and forth between 10 pm and 2 am.
moon will change only after 24 hr round (not during quick day change)
hope this helps
eli

Posted on Aug 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i set my settings to record the distance on my nb gps runner


On my new NB Runner GPS watch, how do I set the setting back to zero each time so I know how far I have gone ?
The problem I have with it is that the next day when I turn on the run mode it shows the previous day numbers.

Mar 25, 2013 | New Balance Gps Runner Sport Watch,...

1 Answer

My Sportline won't zero the steps


find your watch off this link below click on it and download the manual
http://www.sportline.com/products/heart-rate-monitors.html

Sep 20, 2012 | Watches

1 Answer

Watch Manual for Sergio Valente model# F-IAGAG


These are operating instructions for an SV F-IAGAG (Sergio Valente) watch.

There are four buttons on the watch.

A: upper left
B: lower left
C: upper right
D: lower right

Pressing A turns on the watch face backlight.

Pressing B changes the mode.

From the normal time display mode, one press of B enters the stopwatch mode. In this mode, pressing C will start the stopwatch time count. Pressing C again will stop the count. Each additional press of C will start/stop the count. While the count is proceeding, pressing D will freeze the display of stopwatch time, yet the count will continue. Pressing D again will cause the display to begin updating with the running count. Each press of D will freeze/unfreeze the display update. When the count is stopped (with a press of C), pressing D will reset the count to zero. From this mode, press B again to return to time display mode.

From the normal time display mode, two presses of B enters the alarm time set mode. In this mode, either the hour or minute portion of the time display will be flashing. That which is flashing can be changed by pressing C. Pressing D will switch to the other portion (hours or minutes). Any time the alarm mode is entered and a change is made, the alarm is set to "on". This is indicated by a check mark in the circle display next to the "9" on the watch face. The alarm can be toggled "on" and "off" from the normal time display mode by holding down button D and pressing button C. Return to the normal time display mode by pressing button B while in the alarm time set mode.

From the normal time display mode, three presses of B enters the time set mode. Upon first entering this mode, the seconds display in the circle near the watch face "3" will be flashing. Pressing button C will reset the seconds to zero. Each press of the D button will advance to a different value field for adjustment. The field of adjustment will be flashing. The sequence of fields is (seconds - minutes - hours - date day - date month - date day). Pressing C will change the value. When adjusting the hours, both 24hr format, and 12hr AM/PM format is available. Each press of button C will advance the hour value. The sequence of 24hr format will be indicated with an "H" in the "seconds" circle (near the watch face "3"). After hour value 24 of the 24hr format, the next hour is a "12" value, with an "A" in the seconds circle. Twelve presses of button C will step through the AM hour values and present an "12" value with a "P" in the seconds circle. Twelve more presses advances through the PM hour values and returns to the 24hr format. Pressing button B will return to time display mode.

Pressing button C while holding down button D will toggle the alarm "on/off" state. The "on" state is indicated with a check mark in the display circle next to the "9" on the watch face.

Jan 08, 2012 | Watches

2 Answers

How to set up second hand and chrono minutes for bulova 98B105 back to zero setting?


If you haven't got the user instructions you can get them via the following link:-http://www.bulova.com/watches/bulova/marine-star/98b105/

You should see "download user manual" at the bottom of the page.

Mar 31, 2011 | Bulova Marine Star Calendar #98B105 Watch...

1 Answer

How do u get hourly beep to turn off on digital watch


Hi,

To set time, date, and options:
1) With time and date showing, press and hold SET.
2) Current time zone (1, 2, or 3) flashes. Press + or to select time zone to set, if desired.
3) Press NEXT. Hour flashes. Press + or to change hour (including AM/PM); hold button to scan values
4) Press NEXT. Minutes flash. Press + or to change minutes
5) Press NEXT. Seconds flash. Press + or to set seconds to zero.
6) Press NEXT. Month flashes. Press + or to change month.
7) Press NEXT. Day flashes. Press + or to change day.
8) Press NEXT. Year flashes. Press + or to change year.
9) Press NEXT to set options. Press + or to change value and then press NEXT to go to next option. Press DONE at any
step to exit and save settings. Available options are 12- or 24-hour time format, MM-DD or DD.MM date format, hourly
chime N, beep for button presses, customizable mode set (Select “HIDE” for unwanted modes – they are removed
from mode sequence).


Timex has two ways to find information about your particular watch. Some of these models only have a guide consisting of a few pages. If you don't have the manual, Try this link:

Complete Timex link site:
http://www.timex.com/info/Product_Instruction_Guides_Downloads

Now, look up the model number, or if you cannot find that, check the three-digit Module Number from the back of the watch. Click on it in the Module Table, and download a PDF of your watch setting-instructions/manual.


If you need further help, call Timex in Little Rock, Arkansas, phone 1-800-448-4639.

I hope this helps you. Thanks, Bill

Aug 31, 2010 | Timex Watches

1 Answer

Change day but not date on Timex Expedition


HI..
HERE IS STEPS FOR SETTING OF YOUR WATCH... STEP3 EXPLAINS THE SETTING OF DAY,DATE.....
  • Step 1 Push in the lower right button until you see the seconds flash. Press the upper right button to run the seconds display down to zero. Push the bottom left button to get into the mode to set the hours. Press the top right button to scroll through the numbers. Watch that you choose a.m. or p.m. correctly.
  • Step 2 Press the bottom left button to get into the mode to set the minutes. Again, push the top right button to scroll through the numbers until you reach the correct time.
  • Step 3 Repeat the process from Step 2 four times to set the month, date and day of the week and to change to military time if you wish. Push the bottom right button to save your settings. You'll notice the colon between the numbers will start to flash.
  • THANK YOU
  • Jul 28, 2009 | Timex Expedition Outdoor Athletics Watch...

    1 Answer

    Date setting of Frederique constant


    hi
    never change week or date when day is on "sun" or "mon" also never change date or week or day when time is between 9 pm and 5 am.
    to change day, move time back and forth between 10 pm and 2 am.
    moon will change only after 24 hr round (not during quick day change)
    hope this helps
    eli

    Oct 17, 2008 | Watches

    10 Answers

    How do I change time on timex watch?


    These are settings for the Timex SPORTS 1440 Magnetism (5b841 -W163US)
    These are for the 4 button SPORTS 1440 (not 6 button) - they will also work for the 1440 SPORTS "Informer" model wrist watch - you will NOT find these instructions on the Timex website - only the 6 button which will not work on these watches is on that site!

    TIME AND DATE
    1. Press and hold MODE until HOURS digits flash (you'll be in Alarm Mode) Press MODE again to enter TIME mode, SECONDS digits will flash.
    2. Press ADJUST to set SECONDS to zero.
    3. Press START/STOP to select MINUTES.
    4. Press ADJUST to change.
    5. Repeat to set HOURS, MONTH, DAYS, and DAY of WEEK. Go through 12 hours to set AM or PM.
    6. Press MODE when done.
    7. To display DATE from Time display , press START/STOP.
    8. With DATE displayed press and hold START/STOP, then press ADJUST to change display between DATE-MONTH and MONTH-DATE.
    9. With TIME displayed, press and hold ADJUST, then press MODE to switch between 12-and 24-hour format.
    ALARM AND HOURLY CHIME
    1. Press and hold MODE until HOURS digits, DAY, and A or P (for AM or PM) flash.
    2. Press ADJUST to change HOURS digits. Go through 12 hours for AM or PM.
    3. Press START/STOP to select MINUTES.
    4. Press ADJUST to change.. Press MODE when done.
    5. Press and hold ADJUST, then press START/STOP to turn chime on/off. Press START/STOP again to turn alarm on /off. Release START/STOP when done.

    CHRONOGRAPH
    1. Chronograph will count up to 24 hours. Lap times are not stored. After 40 minutes chrono display changes from seconds to minutes.
    2. With time displayed, press MODE to select Chrono Mode.
    3. Press START/STOP to start.
    4. Press ADJUST to view lap time. Press again to sesume lap timing.
    5. Press START/STOP to stop timing . Press ADJUST to reset chrono to zero.
    6. Repeat for successive laps.
    Have fun! - Not a bad watch for the money! - - Silver Bullet

    Mar 16, 2007 | Timex 5B841 Wristwatch

    Not finding what you are looking for?
    Watches Logo

    Related Topics:

    41 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top The Watches Experts

    vince

    Level 3 Expert

    1234 Answers

    D. E. Hev

    Level 3 Expert

    1187 Answers

     Larry
    Larry

    Level 2 Expert

    123 Answers

    Are you a The Watch Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...