Question about Watches

1 Answer

How do I set the digital time on a mossimo analog/digital watch. Where do I find instructions?

Posted by on

  • Don Davey
    Don Davey Aug 25, 2013

    jkimmel Thank you for your 4/20/09 solution to watch programming :-)

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

If you have the Mossimo that is an analog and gisital andhas the four (4) buttons around the side, here is what I have:

Legend:
Button near the number 10 = A
Button near the number 8 = B
Button near the number 2 = C
Button near the number 4 = D

Switch Control/Normal Readout:
Press:
A = E.L. Backlight
B = Mode
C = For Month Date and Day of Week
D = For Alram Time

Setting Sequence:
1. In normal time readout, press B three times to get normal setting mode.
2. Press D once; Minute flashing, Press C to advance.
3. Press D once: Hour flashing, Press C to Advance (A on display = AM, P = PM)
4. Press D once: Date flashing. press C to advance.
5. Press D once: Month flashing, press C to advance.
6. Press D once: Day of Week flashing, press C to advance.
7, Press B once: Setting completes - returns to normal time readout.

Alarm Setting Times:
1. In noraml time readout press B twice, Alarm Time hour flashing, Press C to advance.
2. Press D once: Alarm Time minute flashing, Press C to advance.
3. Press B once:Setting Completed, returns to normal time readout.

Alarm Function
1. In normal time readout, arm alarm by pressing C and D simultaneously. Alarm signal will appear.
2. In normal time readout disarm alram by pressing C and D simultaneously. Alarm signal will disappear.
The alarm will stop itself after 1 minute or can be silenced by pressing D or press C with snooze feature - will re-alarm in 5 minutes for the next hour.

Chime:
1. In normal time readout, chime activated by pressing D and B simultaneously. All day flag appears.
2. In normal time readout, inactivate chime by pressing D and B simultaneously. All day flags disappears.

Chronograph:
1. In normal time readout, press B once to get into 'Chrono" mode. Pressing C will start the counting.
Two Options for "Chrono" mose:
a. Durning coutning, pressing C will stop count and then press D to reset the mark.
-Or-
b. During counting, pressing D will enter teh watch into laptime mode, meaning 1 portion of the count is registered on the display while the counting contiues until completed by pressing C, then D twice.

Posted on Apr 20, 2009

  • Don Davey
    Don Davey Aug 25, 2013

    THANK YOU VERY MUCH. I like this watch and for the life of me couldnt figure out alarm due to losing instructions. ( I even bought another one for my son and I lost those too. ) TY.

  • jpruitt1536
    jpruitt1536 Jan 21, 2014

    Thanks, very helpful

×

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Getting analog part of Mossimo watch to start

FIXED!!!

As it turned out these Mossimo ANA/DIGI watches use two different batteries, one for the digital part (big) and other for the analog mechanism (small).

Have the watch serviced to change the second battery and VOILA!!!!

Enjoy!
Mivales.
Made in Costa Rica!!

Posted on Sep 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mossimo watch instructions


If it isn't working, return it.

Nov 01, 2013 | Watches

1 Answer

To adjust the analog time for ga-110hc-1a


Analog time follows digital time.Correctly set your local time and analog time will come up correctly as well.If not, try to run the hands alignment procedure (H-SET) following manual instructions.

Mar 02, 2013 | Casio G-Shock GW500A-1V Wrist Watch

1 Answer

I have the correct time set in the watch, the main analog clock shows the correct time, but the UTC analog hands19:00 when the UTC digital time is 12:00. How do I reset the UTC analog hour hands?


The hands are driven by the digital. It seems to me you have the wrong digital city. Please review the setting instructions for your Skyhawk at: http://www.citizenwatch.com/

BTW, I love my Titinimum Skyhawk

Aug 03, 2011 | Citizen Skyhawk Eco-Drive JR306059F Wrist...

1 Answer

I have a Mossimo analog watch with date & time with no knowledge of how to adjust those


your watch crown has 3 positions. the normal position, the second position and the third position. just pull it to adjust. the 2nd position is for date adjustment, and the third position is for time then if your done with that steps just push the crown to normal position.

Jul 09, 2011 | Watches

2 Answers

I just bought this watch but can't figure out how to set: time, date, and alarm. Please help. Thank you


set time/datepush the pusher at 4:00 for couple second to start setting mode.pusher at 4:00 is to select time/date, pusher at 2:00 is to adjust time/date
2. if off sync between analog and digital clock happen. You need to resynstep 1: follow the instruction 1 to set digital clock to 12:00.step 2 : push and hold both pushers at 2:00 and 4:00 for couple second until it shows sync modestep 3: once it enter sync mode, you can use pushers at 2:00 and 4:00 to adjust the analog time to 12:00 same as digital.step 4: push the pusher at 3:00 to exit the sync mode. step 5: follow the instruction 1 to adjust digital time to correct time. Analog time will adjust it automatically.

Jan 14, 2011 | ESQ 07301132 Aerodyne watch

1 Answer

I recently bought a Mossimo watch with the analog and digital faces and the analog runs like ****. It keeps stopping and losing minutes. Like won't go accurate for more than an hour. Worse if it's being...


Quite often the battery can be the cause. But note that on some ana/digi watches there will be two batteries. The battery for the analog is usually buried quite deep in the watch and may be best for an expert to replace this. That expert will be able to test the battery first. If the battery is still good then I would suspect that the movement is faulty and may need replacing (although sometimes a bit of de-greaser expertly administered can solve the issue). Good luck.

Sep 20, 2010 | Watches

2 Answers

Men's Mossimo Chronograph watch has 1 stem to change the time and has a day and a month circle. How do you set them?


if its the gunmetal one with the rubber wrist band you cant i just took it appart and there is noting to turn the analog day date or...what ever the other one is sapose to be there actualy just fake and are there to make the watch look fancy ..... f-n lame as sh!t

Dec 13, 2009 | Watches

1 Answer

Mossimo alarm


While in (digital) Clock mode (NOT in alarm setting mode!!!), push the bottom-right button and then the top-right, to toggle alarm on & off.

Jan 29, 2009 | Bulova Men's Watch

3 Answers

Getting analog part of Mossimo watch to start


FIXED!!!

As it turned out these Mossimo ANA/DIGI watches use two different batteries, one for the digital part (big) and other for the analog mechanism (small).

Have the watch serviced to change the second battery and VOILA!!!!

Enjoy!
Mivales.
Made in Costa Rica!!

Sep 01, 2008 | Watches

Not finding what you are looking for?
Watches Logo

Related Topics:

7,130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Arturs Kalnins
Arturs Kalnins

Level 3 Expert

2338 Answers

Marvin
Marvin

Level 3 Expert

85160 Answers

Are you a Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...