20 Most Recent Xerox WorkCentre 7120/P Color Advanced Multifunction Printer, Scanner, Copier Questions & Answers


Error code 092_313

Xerox WorkCentre... | Answered on Feb 25, 2019


check with mfg's website and tech support

Xerox WorkCentre... | Answered on Aug 19, 2016


Hi anonymous,
Sorry for my late reply.
Not quite sure what you want, developer motor failures are not easy to sort out even for the experienced engineers.
You really need the local Xerox engineer who will fix the problem for you. They can be a real strip down job so trying to repair this problem your self could only spell disaster.
if you don't have a contract for your machine then it might be very costly. Your problem might centre upon the actual developer tank in which case removal and fit a new one is best. Trying to repair the tank could prove even more cost if something crops up at a later date.:(
Good luck.

Xerox WorkCentre... | Answered on Jul 02, 2015


Hi Anonymous,
If you have a spare Fuser Unit I would suspect you install that and try it.
Have you had a jam in the fuser in the past in which case check the paper sensors are working correctly by activating them with a sliver of paper.
I have known the exit sensor to be jammed and only when you remove the exit transfer unit to the finisher will it be obvious.
If that is a but daunting then you might need to call in Xerox.
Good Luck.

Xerox WorkCentre... | Answered on Jun 18, 2015


ERROR 92 313

Xerox WorkCentre... | Answered on Mar 03, 2014


co online and you should find a website

Xerox Office... | Answered Yesterday


Pull out xerographic module, then firmly push it back in, or replace

Xerox Office... | Answered 2 days ago


Check the flag on reg sensor (before drum)

Xerox Office... | Answered 2 days ago


Maybe try this, it woks on Sagem that also produces xerox mfp...

Follow the keystrokes set out below, do not worry about what is on the display unless stated to check. All letters referred to are for the keys on the alpha key pad to the right of the control panel, under the plastic flap.

1st option: Press down arrow, *, #, ok, 1, ok, stop (red button),
Press down arrow, #, T.
The machine returns to the error code. Switch the machine off for 10 seconds, switch
back on. If successful the machine will warm up and come ready.
Press down arrow, *, #, 0 (ZERO), ok, stop.

2nd option
Press down arrow, *, #, ok, 1, ok, stop.
Press down arrow, #, look on the display, press up arrow until "T>>PRINTER" is
displayed. Press ok. The machine returns to the error code. Switch the machine off for 10
seconds, switch it back on. If successful the machine will warm up and come ready.
Press down arrow, *, #, ok, 0 (ZERO), ok, stop.
If this is a recurring problem the firmware on the board may need to be upgraded, or there
is a physical fault with the fuser unit. Low voltage / power surges in the supply power to
the machine may also play a part in the occurrence of the error.
The firmware needs to be version 1.10.

To check the firmware version do the following:
Press down arrow, *, #, ok, 1, ok, stop.
Press down arrow, *, W
Firmware version is displayed. Press stop to clear screen.
Press down arrow, *, #, ok, 0 (ZERO), ok, stop.
5401:
Press down arrow, *, #, ok, 1, ok, stop
Press *
The trace lists will be printed, firmware version is after PRT, as in example below.
In this example, the printer firmware is: PRT V 1.5
It is older than V 1.10 and the printer firmware need to be upgraded.njk

Xerox Office... | Answered 2 days ago

Not finding what you are looking for?
Xerox WorkCentre 7120/P Color Advanced Multifunction Printer, Scanner, Copier Logo

18 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Xerox Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

quennie732

Level 2 Expert

422 Answers

docukaaf

Level 1 Expert

31 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Xerox Office Equipment & Supplies

  • Xerox Office Equipment & Supplies

Most Popular Question

error code 092 313

  • Office Equipment & Supplies
Loading...