20 Most Recent Philips Magnavox 27MS343S 27" TV Questions & Answers

Bagaimana mencari signal yg hilang pada tv led philip

Philips Magnavox... | Answered on Mar 20, 2019

To fix this, you need to do something called degaussing. You should keep magnets away from the screen in the future, because they cause this problem.
The first thing to try is to turn it on and off, making sure that all magnets and speakers (which have magnets in them) are kept far away from it. This will activate the monitor's auto-degausser if it has one. If this does not help, this guide: http://www.wikihow.com/Degauss-a-Computer-Monitor gives a couple solutions, including using a soldering gun (not a soldering iron), illustrated in the video below:
With a powerdrill:

Or investing about 60 bucks in a degaussing coil like this which is a guaranteed fix:
One other trick that might work is to take an old CRT monitor ("fat-screen" rather than "flat-screen"), hold it up to the tv screen to screen, and turn it on and off to have the monitor use its own degausser. The monitor may have a button to activate degaussing, or it may be in the menu you can bring up with the buttons on the bottom of the screen.
If you don't want to deal with any of this, a tv repair shop will degauss your tv for you quickly.

Philips Magnavox... | Answered on Sep 11, 2018

My TV is shutting off after you turn it on.Model #27MT5005D.
The light continue to blink, but thats it.

Philips Magnavox... | Answered on Mar 11, 2018

Fault with TV remote sensor section circuit is very rare.
Check the remote control for its infrared emission. Check it with fresh batteries. Check it by pressing all the keys. You can detect the presence of infra-red emission from the remote control, using a cell-phone camera. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. In some cases, the remote control might need to clean.
Search the site by type in this key phrase "how to test a remote control "in the "search box at the top right of the display window of the Homepage" to get the related post quickly.
https://www.youtube.com/watch?v=jsSCNCW3IbQ [open and clean]
https://www.youtube.com/watch?v=Qp-l1uh-5gE [open and clean]

Philips Magnavox... | Answered on Jan 21, 2018

Replace with 105deg capacitors of the SAME RATING, not larger capacity!

Philips Magnavox... | Answered on Jan 13, 2018

Wow 6ya not much of a fixer. I'll be sure to not use this website for advice ??.

Philips Magnavox... | Answered on Jan 06, 2018

If less than a year old, this TV is likely under warranty but should have been taken back immediately to address the issue. I suggest contacting the vendor or manufacturer.

Philips Magnavox... | Answered on Jan 04, 2018

The codes will be the same regardless. Modification of the signals is not possible.

Philips Magnavox... | Answered on Dec 17, 2017

It might be that the sound amplifer is defective if you know anything about electronic you can fix it . If not better take it to someone who can repair it.
The amplifer is the part of electronic that amplifies current so the speekers can be driven. Check it if there is a bad solder or anyhing suspicious.

Philips Magnavox... | Answered on Nov 26, 2017

If its a LCD set not plasma I would look at the connectors going in and out of the Tcon board, remove them and reseat them, if that doesn't help replace the board.

There is one other thing you can try and that is remove the board and put it in your oven at I think its 370 degrees for 10 minutes, Ive never tried doing this but there are some vids on people having good luck doing this, what happens is there are some cold solder joints on the components and putting it in the over will heat them up and the board will work again, search this on youtube and there are vids on how to do it.

Philips Magnavox... | Answered on Nov 11, 2017

The issue here is that the zeners in question are merely like a safety fuse and replacing them before identifying and fixing the cause of the problem will only cause your replacement zeners to blow aswell.... personally if it is a true plasma it likely chews through alot of power anyway so I would take the opertunity to replace the TV with a newer much less power hungry led TV and in doing so save the hip pocket and the environment.

Philips Magnavox... | Answered on Aug 25, 2017

If this model number is what I am seeing then it has an aerial socket so needs an aerial and then setup to tune it in, perhaps you do not have or allowed an aerial then its broadband and one of the companies that have TV feeds.
If its not what I think and an analogue thing then you need a "box" to do this feeding a video audio signal via another cable.
Without more info hard to give any other advice.........

Philips Magnavox... | Answered on Jun 05, 2017

Not finding what you are looking for?

1,054 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76060 Answers

matt martin
matt martin

Level 3 Expert

1255 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Philips Televison & Video

  • Philips Televison & Video

Most Popular Question

get replacement picture tubes signature

  • Televison & Video