20 Most Recent GoVideo Go Video DVD/VCR Combo Questions & Answers


Probable drive failure

GoVideo Go Video... | Answered on Jan 11, 2018


See if you can find the same DVR online, then remove the hard drive from your old one and put it in the newer one. Check ebay, if no luck, check the manufacturer's website.

GoVideo Go Video... | Answered on Dec 15, 2017


You will need to get new cables.

GoVideo Go Video... | Answered on May 04, 2017


Hi Old man
You're going to be in trouble. Beware.

GoVideo Go Video... | Answered on Apr 11, 2017


Sounds like a broken belt, you need to lift out the mech and turn the pulley wheel at the front, then fit a new belt

GoVideo Go Video... | Answered on Dec 15, 2016


ELECTRO MED SERVICES is partially correct with his answer but I'm pretty sure it's not going to be that complicated. First unplug the unit remove the cover and use 90% isopropal alcohol on a cotton swab or q-tip and clean off all of the metal pins that stick up and ride against the tape while it plays, then clean off the big rubber roller that pinches the tape to pull the tape at the correct speed. this is where most often the problem lies. the tape will get sticky and will bind up slightly. Then a there's a sensor on the left side that puts tension on the tape, if that sensor feels the tape is being pulled to hard and has no slack it will shut the player down and eject the tape. Another thing try another tape, that tape may have some hard rolling hubs or spindles. You can also try fast forwarding the tape to the end and then rewind it to make sure its not just rewound with something rubbing inside the tape case it's self. Sometimes the tape case will get deformed over years and it will rub on the tape spools inside and it will cause that sensor to trip when the tape starts to become hard to pull through the player. Also you can clean the big silver head but be careful no make sure you leave no residue on it. look at it with a magnifiying glass to make sure it's cleaned and free of any residue. 1 last thing that happens also is the automatic tape head cleaner will act up and cause problems, you can easily just remove that from the player and see if thats the culprit.

GoVideo Go Video... | Answered on Jan 19, 2016


Trash it !!

GoVideo Go Video... | Answered on Jan 19, 2016


Is there a video output from the vcr? Have you tried the video on another tv set? If other tv set also does not work then the issue is with the vcr output circuits.

GoVideo Go Video... | Answered on Nov 21, 2015


If you mean writing, the machine should do it automatically once you have caused it to write a disc

GoVideo Go Video... | Answered on Jul 14, 2015


Start off with using a vcr tape cleaner make sure you read instructions some are just a brush while some others cleaners have a small liquid cleaner to add to it after using cleaner do not worry about rewinding it until another day you may need it.you can also try switching the progressive scan off if being used.If its eating tapes the tensioner could be loose or wore out or the locking mechanism is not working properly when tape is inserted.If you are not experienced in this field I recommend letting a shop look at it if so cleaning it is about the only thing you do also try opening the vcr tape bay door taking a deep breath and blow inside it without a tape in it do this several times it may just be dust and you can try unplugging it for 10 minutes to reset the device to see if its a stuck communication glitch in the board for the head motors.I hope one of these three basic tricks helps you.

GoVideo Go Video... | Answered on Mar 05, 2015


is this question about the progressive scan when going to dvd mode more than likely the switch to control your p scan is on the back of your vcr/dvd player near the center look on the back and flick the switch to off usually the switches are just black moving left and right if not go into your menu and look for progressive scan mode if its not directly on the menu it is more than likely in the settings folder.Also if your remote is like the one i posted just click the p.scan button

25396646-3s2mdgp4ofhc0ysctb3a25wt-2-0.jpg

GoVideo Go Video... | Answered on Feb 02, 2015


They have inbuilt computers in them and as you know if the system crashes for some reason then like a computer it stops working. However this should only happen a few times and not all the time. If the device is doing it a lot you might be operating it in the wrong way or the wrong conditions - getting too hot for example - or have some kind of fault on it.
Some of them have a special reset button or a combination of buttons that will restore it without pulling the plug. It should mention this in the user manual. If you have lost the manual try searching the net for a PDF version. User manuals are generrally free, service manuals are generally not though.

GoVideo Go Video... | Answered on Jan 11, 2015


It should not affect you menu at all. When you get a settings menu you just switch from Cable to Air and then have it do it\'s auto scan routine. I cut the cord from Comcast to HDTV as soon as I got a house and could install an antenna. The picture quality is MUCH better then the crappy signal Comcast was sending me which always broke up. I get a solid signal from my stations which are 12-33 miles away. The DVR should be similar. My Samsung TV will actually simultaneously scan for both kinds but it\'s unusual.

GoVideo Go Video... | Answered on Sep 21, 2014

Not finding what you are looking for?
GoVideo Go Video DVD/VCR Combo Logo

444 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top GoVideo Televison & Video Experts

Marvin
Marvin

Level 3 Expert

83054 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

509 Answers

 Grubhead
Grubhead

Level 3 Expert

5575 Answers

Are you a GoVideo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

GoVideo Televison & Video

  • GoVideo Televison & Video

Most Popular Question

service center near elk grovr sacramento

  • Televison & Video
Loading...