20 Most Recent Xerox WorkCentre 7328 Multifunction laser printer Questions & Answers


I face an Error code problame 004-350 please told the relief of this code

Xerox WorkCentre... | Answered on Jul 03, 2018


Hi

Xerox Werk Centre 7428 Tray 2 NVM Read / Write Chain-Linc & Current Value

Xerox WorkCentre... | Answered on May 21, 2018


from what I found here

Thread workcentre 7345 error code 009 349

It looks as if you will need a technician to service it

Xerox WorkCentre... | Answered on Jul 07, 2017


Xerox 7346
What is the problem of error code 008-164

Xerox WorkCentre... | Answered on Aug 09, 2016


I don't have that manual, but similar manuals say IBT Home Sensor Error. Check your accumulator belt for damage. You may also have a dirty sensor.
The belt PN is 604K20891and is rather expensive and fragile

Whit
Item, Inc.

Xerox WorkCentre... | Answered on Nov 04, 2015


reopen the cover and look inside with a flash light, there maybe a tiny piece of paper stuck in there you missed, take some compressed air and blow it in there to clean out dust, the talcum powder on the paper, builds up on the sensors, making them think it has paper there.

Xerox WorkCentre... | Answered on Oct 08, 2015


There's no reset for that error, the error indicates that the 1st BTR did not reach the retract position. Try clean the 1st BTR Retract Sensor and look for damage. Also check the gears for breakage.

Xerox WorkCentre... | Answered on Aug 11, 2015


Try : eBay.com
Just make sure you search by part number not machine model number.
eBayeBay

Xerox WorkCentre... | Answered on Jul 07, 2015


Changing the Toner Cartridge sensor is not an easy task.
However if you want to start playing with the internals, firstly you would need to remove external panels.
some sensors look the same and are not interchangeable, but the ones that are, would be easy to spot. If you have a faulty cartridge sensor it would be interchangeable with the others.
Try it, and see what the response you get.
a Xerox service might pay you dividends.
Good luck.

Xerox WorkCentre... | Answered on Apr 02, 2015


The error means that the interval of the ROS (C) signals exceeds the specified value. The normal problem is a bad mcu board. Measure the value between PJ401 on the MCU board and and ground for +5vdc. If you get +5 then replace the MCU board. Part number 960k31352. http://www.iteminconline.com/itemdesc.asp?ic=960K31355&eq=&Tp=

Xerox WorkCentre... | Answered on Sep 26, 2014


116-314 is an ethernet address error. Can you ping the network port? Try reseat the eeprom on the main board. If the settings are all correct and none of that works, you will have to replace the main board, part number 960K39010.

http://www.iteminconline.com/itemdesc.asp?ic=960K39010&eq=&Tp=

Xerox WorkCentre... | Answered on Sep 26, 2014


Hi,
I share a links, so read it and follow instructions. If not understand then contact printer support technician and check it why your printer touch screen not working.
Read more..http://www.office.xerox.com/latest/W73EG-01U.pdfand Xerox Printer Support

Thanks,

Xerox WorkCentre... | Answered on Sep 05, 2014


You may have an exit sensor POB that need adjusting or replace registration assembly

Xerox WorkCentre... | Answered on Aug 26, 2014

Not finding what you are looking for?
Xerox WorkCentre 7328 Multifunction laser printer Logo

97 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Xerox Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

quennie732

Level 2 Expert

422 Answers

docukaaf

Level 1 Expert

31 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Xerox Office Equipment & Supplies

  • Xerox Office Equipment & Supplies

Most Popular Question

009 349 key reset

  • Office Equipment & Supplies
Loading...