20 Most Recent Seiko SGF204 Wrist Watch Questions & Answers


Eugene, SR920W battery, nice watch, I would just take it into a local jewelers and have them replace battery, would not be that expensive and save you the hassle. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
2PC Energizer 371 370 SR920W SR920SW Silver Oxide Battery
Energizer Batteries 371 370 SR920W SR920SW Silver Oxide Watch Battery On...
https://www.seikowatches.com/support/ib/pdf/Analogue_E.pdf

Seiko SGF204... | Answered on Aug 04, 2016


You can purchase your battery from amazon, take a look here: Amazon com SR920SW battery (SR920SW battery is what you need). I hope this was helpful. Cheers

Seiko SGF204... | Answered on Dec 07, 2014


This isn't really a job for the DIY.. Best to take to professional

Seiko SGF204... | Answered on Oct 02, 2013


There is a special tool required that will help you to unscrew the case back on the watch. I found mine at a local WalMart, in the watch battery section of the jewelry area, for $5. This tool will work on other brands, as well, with the same type of case back.

Seiko SGF204... | Answered on Feb 28, 2011


When the watch jumps a second or seems to stop then tick twice, it indicates that the battery is low. You will need to take your watch to have the battery replaced.

Seiko SGF204... | Answered on Feb 28, 2011


Hi...The circuit Board my be defective if an old battery was left in to long ...As for not beeing supported any longer this watch is still beeing sold and is less than 20 years old it should still be supported a solution would be to replace the battery and gently clean the circut board with a dry soft clean tooth brush mainly the areas where the battery is placed

Seiko SGF204... | Answered on Jan 30, 2011


mcdevito75 here, Your stem has 1 positions to set the date easily without haveing to cycle the watch 60 times. First pull the stem out to set the day, set the day 1 day before the day you want, next, push the crown back in, NOW! Slip a finger nail just under the crown from the back as there is more room, it may take some practice so be patiernt and gently, gently lift the crown to it"s first position, once in it"s first position turn the stem and see the DATE change, set the DATE to 1 DATE before the DATE you want, NOW pull the stem out to set the day date and time of day. Your watch is set and the day date will change on time, a little past mid nite.

Seiko SGF204... | Answered on Jul 23, 2010


mcdevito75 here, Best Bet, you may need a special tool to remove and replace the SPRING BARS (PINS) that hold the band onto the watch, then you may even need new spring Bars, (pins) to re-attach the band to rthe watch. BEST BET, look for a small watch repair shop in your area to change the band.

Seiko SGF204... | Answered on Jul 21, 2010


Depends on a lot, What part of the world it was sold in, who sold it etc, etc.

Seiko SGF204... | Answered on Jun 14, 2010


If you are still wondering about this, pull the knob out to the first click. turn one way to set day, turn the other way to set date. Pull out further to set time.

Seiko SGF204... | Answered on Mar 09, 2010


The 7N43 movements are readily available for less than $25 and any jeweler can install them. I own the same watch myself and really like it but after 14 years the date wheel is slipping and its cheaper to replace the whole movement than fix it.
I'd try a different jeweler as obviously yours is trying to sell you a new watch!

Seiko SGF204... | Answered on Jan 04, 2010


If you pull out the stem 1/2 way, you set the date one direction, and the day the other. If you pull it out all the way, it moves the hands and sets the time.

Seiko SGF204... | Answered on Feb 03, 2009


Unfortunately, the Seiko website does not have a serial number lookup, so you'll have to identify the model. The "8123-7190" is what Seiko calls the "caliber code." Entering that on the page linked below will narrow down the model number list for you. Clicking on the link for your model will give you the instructions in PDF format. The instructions for your model tell you what size battery to use. For example, the manual for the 8F32 states on page 11 that the battery size for that model is CR2412. (Note - be sure to get the correct instructions; different models have different battery sizes.) "Automatic" Divers watches have no battery, they are powered by a spring mechanism.

Seiko Watches | Answered on Sep 28, 2018


the make of the battery is of no importance
it is the size and voltage that counts
if the watch is water proof , you will need to have a jeweller or watch maker replace the battery as the case will be sealed

Seiko Watches | Answered on Sep 22, 2018

Not finding what you are looking for?
Seiko SGF204 Wrist Watch Logo

27 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Seiko Watches Experts

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Marvin
Marvin

Level 3 Expert

83096 Answers

Mental Breakdown

Level 1 Expert

12 Answers

Are you a Seiko Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Seiko Watches

  • Seiko Watches

Most Popular Question

need battery seiko 7n43 9070

  • Watches
Loading...