20 Most Recent Xerox WorkCentre 3325/DNI - Multifunction fax / copier / - 3325/DNI Questions & Answers


Their is no fax board in the machine

Xerox WorkCentre... | Answered on Feb 11, 2014


co online and you should find a website

Xerox Office... | Answered Yesterday


Pull out xerographic module, then firmly push it back in, or replace

Xerox Office... | Answered 2 days ago


Check the flag on reg sensor (before drum)

Xerox Office... | Answered 2 days ago


Maybe try this, it woks on Sagem that also produces xerox mfp...

Follow the keystrokes set out below, do not worry about what is on the display unless stated to check. All letters referred to are for the keys on the alpha key pad to the right of the control panel, under the plastic flap.

1st option: Press down arrow, *, #, ok, 1, ok, stop (red button),
Press down arrow, #, T.
The machine returns to the error code. Switch the machine off for 10 seconds, switch
back on. If successful the machine will warm up and come ready.
Press down arrow, *, #, 0 (ZERO), ok, stop.

2nd option
Press down arrow, *, #, ok, 1, ok, stop.
Press down arrow, #, look on the display, press up arrow until "T>>PRINTER" is
displayed. Press ok. The machine returns to the error code. Switch the machine off for 10
seconds, switch it back on. If successful the machine will warm up and come ready.
Press down arrow, *, #, ok, 0 (ZERO), ok, stop.
If this is a recurring problem the firmware on the board may need to be upgraded, or there
is a physical fault with the fuser unit. Low voltage / power surges in the supply power to
the machine may also play a part in the occurrence of the error.
The firmware needs to be version 1.10.

To check the firmware version do the following:
Press down arrow, *, #, ok, 1, ok, stop.
Press down arrow, *, W
Firmware version is displayed. Press stop to clear screen.
Press down arrow, *, #, ok, 0 (ZERO), ok, stop.
5401:
Press down arrow, *, #, ok, 1, ok, stop
Press *
The trace lists will be printed, firmware version is after PRT, as in example below.
In this example, the printer firmware is: PRT V 1.5
It is older than V 1.10 and the printer firmware need to be upgraded.njk

Xerox Office... | Answered 2 days ago

Not finding what you are looking for?
Xerox WorkCentre 3325/DNI - Multifunction fax / copier / - 3325/DNI Logo

9 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Xerox Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

quennie732

Level 2 Expert

422 Answers

docukaaf

Level 1 Expert

31 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Xerox Office Equipment & Supplies

  • Xerox Office Equipment & Supplies

Most Popular Question

xerox workcenre 3325 when press fax

  • Office Equipment & Supplies
Loading...