Question about Hurricane Motorcycles

Open Question

How to hard reset my hurricane gica - Hurricane Motorcycles

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1988 Honda CBR 750 Hurricane no spark on 2 and 3 cylinder


Hi, Anonymous and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead acid batteries.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting/leaking, spark plug cable connections loose check for spark leakage in the dark.
6. Faulty ignition coil or electronic control module.
7. Faulty pulse coil.
8. Faulty CKP, CMP, or BAS sensor.
9. Faulty ignition switch.
10. Tilt sensor needs a reset.
11. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Testing Honda Coils and CDI boxes
88 Hurricane 600 No spark CBR Forum Enthusiast forums for Honda CBR Owners
414results for hurricane manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda CB Owners Manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Oct 20, 2013 | 1988 Honda CBR 750 Hurricane

1 Answer

1989 Honda CBR 600 F Hurricane valve adjustment


Hi, Bill for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Valve Clearance Clarification CBR Forum Enthusiast forums for Honda CBR...
How to Check Valve Clearance on CBR600F4
http://www.home-business-host.com/images/cbr/CBR1000F%20SC21%20(1987-1996).pdf
https://www.partsfish.com/page/oem-parts-for-honda
Honda CBR600F Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Feb 11, 2012 | 1989 Honda CBR 600 F Hurricane

1 Answer

How fast are typhoon winds


hello jackson.....

Typhoons form over the western Pacific Ocean. When similar storms form over the Indian Ocean they are referred to as cyclones, and in the Atlantic and eastern Pacific oceans these storms are called hurricanes.

Typhoons and hurricanes and cyclones are rated in strength according to the Saffir-Simpson Hurricane Scale. Category One hurricanes and typhoons have a sustained wind speed of 74 to 95 mph. Sustained wind speeds of 96 to 110 mph raise the hurricane/typhoon to Category Two. A Category Three hurricane/typhoon sustains wind speeds of 111 to 130 mph. At Category Four, a hurricane/typhoon has sustained wind speeds of 131 to 155 mph. When sustained wind speeds exceed 155 mph, the hurricane/typhoon is classified as a Category Five storm.

Joe
Thanks for choosing Vr2020!!

May 21, 2011 | Kitchen Ranges

1 Answer

Mi impresora canon mp150 prsenta error 6500 y no encuentro solucion agradeszco su opinion


Un error 6500 hace referencia a un error de la placa l?gica en la impresora. Con el fin de solucionar el problema, le recomiendo lo siguiente:

1. desench?felo y desconecte la impresora del equipo. desenchufar la impresora de la toma de corriente.
2. Pulse y mantenga presionado el bot?n "On" durante 30 segundos, luego deje la impresora solo por 10 minutos. Esto permitir? que alll corriente el?ctrica para ser dado de alta de la impresora.
3. conectar todo de nuevo a la computadora y toma de corriente. Encienda la impresora.
4. eliminar los dep?sitos de tinta de la impresora, a continuaci?n, volver a asiento. Aseg?rese de escuchar cada "clic" en su lugar a medida que los puso pulg
5. Apague la impresora y, a continuaci?n, de nuevo, prueba para ver si funciona ahora.

Si no es as?, tendr?s que ponerte en contacto con Canon para la reparaci?n de la impresora / una junta nueva l?gica para la impresora.

Dec 28, 2010 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Drive terminators


Translate from portuguese to english... Meu HD também estava com este problema, o que fiz foi limpar o contato que liga a placa lógica do HD ao leitor do disco rígido que estava oxidado. O problema ficou resolvido.

Dec 27, 2007 | Samsung (SP0411N) 40 GB Hard Drive

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hurricane Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5627 Answers

Marvin
Marvin

Level 3 Expert

83810 Answers

1400Slugg

Level 2 Expert

260 Answers

Are you a Hurricane Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...