Question about 2001 Suzuki GSX 1300 R Hayabusa

1 Answer

2001 Suzuki GSX 1300 R Hayabusa error code C41

After filling up with momentum99 my bike started to splutter, the next time I tried to start it, it wouldn't fire up. Tried the obvious f1 light is flashing. It's a code c41 error. If I bypass the ECM/ECU the bike will start so do I need to replace the ECM/ECU. Or is it dodgy fuel? @

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Vr2020 Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Suzuki Master
  • 51,988 Answers

Hi, Tommo for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
c41 code low idle pc3 blue flame Suzuki GSX Motorcycle Forums Gixxer com
Suzuki Fault Codes
Suzuki GSX1300R Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki/suzuki-gsx-owners-manuals

Posted on Oct 11, 2018

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 104 Answers

SOURCE: '04 vl800 shutting down (fuel?)

ITS FUEL QUALITY YOU NEED TO CLEAN OUT YOUR TANK FUEL LINES AND CARB AND USE HIGHER OCTANE FUEL

Posted on Feb 13, 2009

  • 1 Answer

SOURCE: Rear Carb leaks fuel out of overflow

Hole in the float. It fills with gas, sinks and fails to stop the fuel flow

Posted on Apr 25, 2009

polarcycle
  • 1392 Answers

SOURCE: f1 displayed

The FI light is letting you know there is a problem with the Fuel Injection system on the bike. You will most likely need to take it to the dealer and have them diagnose it with their computer. You can check your fuses and make sure they are intact, but most likely dealership problem.

Posted on Jul 16, 2009

  • 3567 Answers

SOURCE: suzuki gsxr k6 600 fuel injectors problems

The display is really FI as in Fuel Injection. The fuel injection computer has sensed a fault in the Injection system. You will need to ride the bike to a dealer and have them read the fault codes. It is probably just something minor. Major faults will not allow the bike to run. You will not hurt the bike if you ride it.

Can I get a “very helpful” rating on this answer?

Posted on Aug 13, 2009

polarcycle
  • 1392 Answers

SOURCE: suzuki sv1000s , f1 light came on and the bike doesn't start

Sounds like you have a problem with the computer or the FI system on the bike. That is what the (F)uel (I)njection is on for.

Posted on Aug 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 Suzuki GSX-R 1000 code C41


Hi, Justin for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
C41 FI code fuel pump not priming bad ECU Suzuki GSX Motorcycle Forums...
Suzuki Fault Codes
Suzuki GSX R1000 Service Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
Suzuki GSX R1000 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

May 12, 2018 | 2001 Suzuki GSX-R 1000

1 Answer

My bikes shuts off when I am riding at over 70 mph then it starts back up. any advise


  1. Hayabusa Superbike - Suzuki Hayabusa Specs and ...

    www.hayabusasuperbike.com/ TOP SITE for Suzuki Hayabusa Superbikes. This website isdedicated to HayabusaSuperbike Maintenance Tips, Motorcycle Specs, Busa OEM Parts, Repair ...

Jun 24, 2015 | 2006 Suzuki GSX 1300 R Hayabusa

1 Answer

2002 Suzuki GSX 1300 R Hayabusa error code 12


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How to diagnose FI light and obtain ecu fault code General Bike Related...
Suzuki Fault Codes
Suzuki GSX1300R Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki/suzuki-gsx-owners-manuals

Feb 01, 2014 | 2002 Suzuki GSX 1300 R Hayabusa

1 Answer

2001 Suzuki GSX 1300 R Hayabusa code c23 and c41


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
FI CODE FLASHING Suzuki GSX Motorcycle Forums Gixxer com
Suzuki Fault Codes
Suzuki GSX1300R Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki/suzuki-gsx-owners-manuals

Jan 13, 2014 | 2001 Suzuki GSX 1300 R Hayabusa

1 Answer

2004 Suzuki GSX 1300 R Hayabusa overheating


Hi, Anonymous and the usual suspects are:
1. Low coolant level.
2. Restricted radiator air flow.
3. Faulty thermostat.
4. Coolant pump or fans inoperative.
5. Vent hose crimped.
6. Air in the coolant and needs bleeding.
7. Engine idling too long or bike moving too slow.
8. Coolant too old needs to be replaced.
9. Faulty temperature sensor, wiring or connector.
10. Radiator veins clogged or corroded needs repair
11. Ignition timing retarded.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Hayabusa overheating Busa problems
03 Hayabusa Overheating Options exhausted
Suzuki GSX1300R Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki/suzuki-gsx-owners-manuals

Sep 04, 2013 | 2004 Suzuki GSX 1300 R Hayabusa

1 Answer

2001 Suzuki GSX 1300 R Hayabusa temperature gauge stuck on hot


Hi, Anonymous and the usual suspects are:
1. Grounded temperature light/gauge circuit.
2. Faulty thermostat temperature sensor.
3. Faulty cylinder head heat sensor.
4. Faulty thermostat.
5. Faulty light or gauge.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Chec temp gauge reading high Busa problems
Engine temp gauge
Suzuki GSX1300R Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki/suzuki-gsx-owners-manuals

May 18, 2012 | 2001 Suzuki GSX 1300 R Hayabusa

1 Answer

2003 Suzuki GSX 1300 R Hayabusa will not start cold


Hi, Paulrmevarez and the usual suspects are:
1. Fuel cap or fuel tank is not venting properly.
2. Fuel filter clogged.
3. Fuel line pinched or kinked.
4. Vacuum line from the petcock to intake manifold cracked.
5. Float needle and seat sticking.
6. Float level too low.
7. Carburetor bowl vent line clogged/blocked/pinched.
8. Idle adjusting screw set too low.
9. Air/fuel mixture screw set too lean.
10. Idle port, transfer ports, slow air jet clogged.
11. Slow fuel jet clogged.
12. Faulty fuel pump.
For more information about your issue and valuable "Free" downloads that you will need please Click on the blue links below. Good luck and have a wonderful day.
Possible wrong battery and other problems Suzuki GSX Motorcycle Forums...
hayabusa starting problem GSXR1300
Suzuki GSX1300R Manual
OEM parts for Suzuki
Suzuki GSX1300R Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Jul 01, 2017 | 2003 Suzuki GSX 1300 R Hayabusa

1 Answer

2000 Suzuki GSX 1300 R Hayabusa engine shuts down when the cooling fan turns on


Hi, Dennis2000 you may have a faulty temperature switch telling the ECM to shut down the bike for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2000 Busa randomly cutting out and dying on me UPDATE
Suzuki Fault Codes
Suzuki GSX1300R Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki/suzuki-gsx-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Nov 01, 2017 | 2000 Suzuki GSX 1300 R Hayabusa

1 Answer

I have a 2006 hayabusa it turns over but wont start


Hello,
Assuming that the bike is stock with no modifications, the first thing to try is to sit on the bike and lift the side stand up to the riding position. If the bike starts then you may have a problem with the side stand switch or the clutch lever switch.
Has the bike been sitting for a long time? Does the fuel smell stale?
Please try the side stand procedure and then contact me back.
Steve

Jan 21, 2011 | 2001 Suzuki GSX 1300 R Hayabusa

1 Answer

2005 Suzuki GSX 1300 R Hayabusa error code 13


Hi, Gkendall for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
FI CODE FLASHING Suzuki GSX Motorcycle Forums Gixxer com
Suzuki Fault Codes
Suzuki GSX1300R Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki/suzuki-gsx-owners-manuals

Jun 08, 2010 | 2005 Suzuki GSX 1300 R Hayabusa

Not finding what you are looking for?
2001 Suzuki GSX 1300 R Hayabusa Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

Marvin
Marvin

Level 3 Expert

83810 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

5627 Answers

Fabrice Wolters

Level 2 Expert

331 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...