Question about 2008 Suzuki GSX 1300 R Hayabusa

1 Answer

2009 Suzuki GSX 1300 R Hayabusa no brake light

2009 Hayabusa all light work but brake light. It doesn't even click when brakes are applied help, please @

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Vr2020 Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Suzuki Master
  • 51,066 Answers

Hi, Adamchinn79 before diagnosing any brake light issue always check the bulb and fuse first for integrity a brake light staying on is usually caused by the front brake light switch, which is mechanical, not disengaging. On early models moving the throttle control housing closer to the front brake master cylinder is the main fix. On late models, the switch gets tweaked and needs to be realigned. A brake light that does not come on when the brake lever is applied can be caused by a faulty switch or no continuity in the wiring at the switch. The rear brake light switch is hydraulic and it is extremely rare to malfunction in a closed circuit condition causing the brake light to stay on. Usually, rear brake light switch issues are caused by no brake pedal free play or a sticky rear master cylinder piston. A brake light that does not come on when the rear brake pedal is depressed can be caused by a faulty switch, air contamination in the brake line, or no continuity in the wiring at the switch. Finally, most tail light wiring harnesses run under the rear fender held in place by spot welded clips. Worn out rear shocks or lowered suspension can bottom out causing the rear tire to come in contact with the wiring harness, rubbing the insulation off, exposing the bare metal inner core, allowing it to break or short out.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
TAIL LIGHTS WORKING BUT NOT MY BRAKE LIGHTS nbsp HELP Busa problems
Back Off Brake Light Installation 2009 Hayabusa Gen 2
Suzuki GSX1300R Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki/suzuki-gsx-owners-manuals

Posted on Oct 11, 2018

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: I have a 2009 model Suzuki Hayabusa.The turn

I've got the same problem on my 08 Busa. Both times happened after turning left. The second definitely happened when I turned on the left turn signal. The 4 way flashers worked after I replaced the fuse the first time. Perhaps the left turn signal worked a few times between replacing the fuse the first time the second time it blew. I looked at the left handlebar switch and can't see a problem in it. Next, I'm going to trace some wires.

Bugslayer

Posted on Nov 17, 2010

  • 280 Answers

SOURCE: rear brake not responding well, minimal braking

Hi, the lever should not go all the way down, sounds like you have air in your brake system, check your brake pads, if they are ok than bleed the rear brake system, the lever should never bottom out.

Posted on Mar 28, 2011

Testimonial: "thank you, bled the brakes last night, worked a treat!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 Suzuki GSX 1300 R Hayabusa wiring diagram


Hi, Samuel for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Suzuki, despair not, for a mere zero $ you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
http://kaele.com/~kashima/car/busa/GSX-1300R_E-03_Wiring_Diagram.pdf
Suzuki Motorcycle Wiring Diagrams
2008 2012 Suzuki Hayabusa GSX R1300 Service Manual Moto Data Project
OEM parts for Suzuki
http://mybikemanuals.com/suzuki/suzuki-gsx-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Mar 01, 2017 | 2008 Suzuki GSX 1300 R Hayabusa

1 Answer

The clocks on my 2008 Hayabusa switched off today while I was riding. Turn signals, rear brake and tail lights not working. Can anyone help?


Hi, Andrew and the usual suspects are:
1. Blown light circuit fuse.
2. Faulty ignition switch.
3. Faulty wiring, corroded, loose, or broken pins/sockets in the wire harness connectors of the light circuit. For this scenario, you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Speedo and tach are not working
Headlight Tail light not getting power
Suzuki GSX1300R Manual
OEM parts for Suzuki
Suzuki GSX1300R Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Nov 24, 2016 | 2008 Suzuki GSX 1300 R Hayabusa

1 Answer

2005 busa no brake lights all other lights work


Hi, Ashley before diagnosing any brake light issue always check the bulb and fuse first for integrity a brake light staying on is usually caused by the front brake light switch, which is mechanical, not disengaging. On early models moving the throttle control housing closer to the front brake master cylinder is the main fix. On late models, the switch gets tweaked and needs to be realigned. A brake light that does not come on when the brake lever is applied can be caused by a faulty switch or no continuity in the wiring at the switch. The rear brake light switch is hydraulic and it is extremely rare to malfunction in a closed circuit condition causing the brake light to stay on. Usually, rear brake light switch issues are caused by no brake pedal free play or a sticky rear master cylinder piston. A brake light that does not come on when the rear brake pedal is depressed can be caused by a faulty switch, air contamination in the brake line, or no continuity in the wiring at the switch. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
2008 Busa brake light not working
http://www.carlsalter.com/pdfs/Suzuki_GSX1300R_Hayabusa_Service_Manual_1999-2003.pdf
OEM parts for Suzuki
http://mybikemanuals.com/suzuki/suzuki-gsx-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Jul 10, 2016 | 2005 Suzuki GSX 1300 R Hayabusa

1 Answer

2009 Suzuki GSX 1300 R Hayabusa instrument cluster not working


Hi, Anonymous if some or all of your instrument cluster goes dark/blank immediately upon startup or a few minutes later riding down the road the usual suspects are:
1. Blown instrument fuse.
2. A bad ground in the instrument circuit.
3. Faulty wiring before or after the fuse.
4. Faulty wiring or connector between the fuse and the instrument cluster.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Speedo and tach are not working Suzuki GSX Motorcycle Forums Gixxer com
Suzuki Hayabusa GSXR speedometer problem FIX
Suzuki GSX1300R Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki/suzuki-gsx-owners-manuals

May 01, 2014 | 2008 Suzuki GSX 1300 R Hayabusa

1 Answer

2000 Suzuki GSX 1300 R Hayabusa fork oil capacity


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Parts Specifications SUZUKI GSX 1300 HAYABUSA Louis Motorcycle Leisure
Hayabusa gen1 fork oil change
Suzuki GSX1300R Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki/suzuki-gsx-owners-manuals

Aug 06, 2012 | 2000 Suzuki GSX 1300 R Hayabusa

1 Answer

2006 Suzuki GSX 1300 R Hayabusa jumping out of gear


Hi, Eric and the usual suspects are:
1. Shifter pawl improperly adjusted.
2. Shifter drum improperly adjusted or damaged.
3. Shifter engaging parts/dogs badly worn or rounded.
4. Shifter forks bent.
5. Damaged gears.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2nd Gear problems Busa problems
Suzuki gsx1300r transmission engine split bad shift fork
Suzuki GSX1300R Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki/suzuki-gsx-owners-manuals

Jul 03, 2012 | 2006 Suzuki GSX 1300 R Hayabusa

1 Answer

I have a 2009 model Suzuki Hayabusa.The turn signal fuse which is 10amp keeps blowing.This leaves me with no turn signals,rear tail light,brake light, and no dash functions.Any ideas anyone???


I've got the same problem on my 08 Busa. Both times happened after turning left. The second definitely happened when I turned on the left turn signal. The 4 way flashers worked after I replaced the fuse the first time. Perhaps the left turn signal worked a few times between replacing the fuse the first time the second time it blew. I looked at the left handlebar switch and can't see a problem in it. Next, I'm going to trace some wires.

Bugslayer

Sep 17, 2010 | 2008 Suzuki GSX 1300 R Hayabusa

Not finding what you are looking for?
2008 Suzuki GSX 1300 R Hayabusa Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

Marvin
Marvin

Level 3 Expert

83096 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

5374 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...