Car & Truck Repair Questions, Solutions & Tips Page 2 - Vr2020

Cars & Trucks - Page 2 - Recent Questions, Troubleshooting & Support

Check battery first. If it's good check starter relay and any fuses for the starter, if any. If still nothing and all relays and fuses are good, you probaly have a bad starter.

Mercedes-Benz... | Answered 2 hours ago

Cars & Trucks | Answered 2 hours ago

The most common cause of this code being stored is a defective vent valve or vent valve control solenoid. Other causes may include a faulty or improperly installed fuel cap, a faulty purge control solenoid, a clogged or broken charcoal canister, broken or cracked vacuum or fuel vapor hoses, a faulty pressure or flow sensor, or a bad PCM. Corroded, broken, or shorted system circuitry or connectors are also likely culprits. The vent valve is located underneath the car, attached to the charcoal canister, behind a large black plastic shield and next to the fuel tank. Any question feel free to write back. Good Luck.

Kia Cars &... | Answered 2 hours ago

If you can access the settings on the screen menu (gear icon), then keep scrolling to the right and then see a 'system' option on the screen there will be a language option there (tap the navigation arrow on the top right of the screen 7 times). View the languages (tap the second one down the list) and select the one appropriate for your region. Be aware that you may not be able to receive FM broadcasts outside of the Japanese bandwidth.

*this works on later Mazda Axela/3 models. Unsure if it will work on the MY11 model. Once you have changed the language you can proceed to go through the menus to alter other settings like connectivity, display in miles/kilometres etc)

Mazda Cars &... | Answered 3 hours ago

The torque spec for the three mounting bolts are 133 Ft Lbs.
The torque spec for the axle nut is 177 Ft Lbs.

Cars & Trucks | Answered 3 hours ago

Fed speed sensor are outside the trans on case near axle

Infiniti Cars &... | Answered 3 hours ago

repair the water pump

Mercury Cars &... | Answered 3 hours ago

The oss and iss are inside, test them 1st prolly ok

Infiniti Cars &... | Answered 3 hours ago

No I went ages ago

Infiniti Cars &... | Answered 4 hours ago

A cheat that works every time. Disconnect your spark plug leads, fit the socket and breaker bar to the sprocket bolt and rest the end of the bar on the chassis rail or frame (turn the breaker bar and socket on the sprocket bolt as if you're trying to undo the bolt until it makes contact with a part of the car that won't be damaged and maybe rest a rag under it) Turn the ignition key on and off rapidly 1-2 times and the torque from the starter motor will be more than sufficient to undo the bolt.

Nissan Cars &... | Answered 4 hours ago

Found a walk through on the VG30E Maxima 3.0 that will be the same. Scroll down the page and there's an image of the tensioner adjustment using an allen key -
Nissan Maxima Timing Belt Change Tutorial

Nissan Cars &... | Answered 4 hours ago

There’s a picture under the hood on hood wipe it off and you can read the vacuum line charting

Nissan Cars &... | Answered 4 hours ago

Not finding what you are looking for?
Cars & Trucks Logo

2,120,317 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts


Level 3 Expert

83096 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22382 Answers

john h

Level 3 Expert

17852 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides