Question about 2005 Chevrolet Malibu

1 Answer

I have a 05 Malibu jerks to every shift. Flashing two codes together po748 and co561 what does it mean?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 15,575 Answers

When the PCM detects a continuous open, short to ground or short to voltage in the PC solenoid valve circuit, then DTC P0748 sets. DTC P0748 is a type C DTC.
PC - pressure control solenoid .
The powertrain control module (PCM) uses the pressure control (PC) solenoid valve in order to regulate the transmission line pressure. The PC solenoid valve consists of an electrical connector, a coil, an armature, a regulating spring, and a poppet valve. The PC solenoid valve is attached to the control valve body. The PCM compares TP voltage, fluid temperature, gear states, and other inputs in order to determine the line pressure appropriate for a given load. The PCM regulates the pressure by applying a varying amperage to the PC solenoid valve. The applied amperage varies from 0.1 amps for maximum line pressure to 1.1 amps for minimum line pressure. The PCM then monitors the amperage at the return line.
C0561
System Disabled Information Stored
EBCM
DTC C0561 in Antilock Brake System This code is a result of the transmission code .
The electronic brake control module (EBCM) disables the traction control when other electronic control modules set DTCs for components that effect the operation of the traction control system.

Posted on Apr 09, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Abs code co561 what does it mean?


The code means the EBCM (electronic brake control module) is receiving faulty data from other modules or is faulty itself. If you are asking what has failed, IDK. This issue requires diagnostics. If you want to. Write back with Year Make and Model. I suspect this is a GM vehicle. Please let me know if there is anything else.

Sep 25, 2018 | Cars & Trucks

2 Answers

Code C0561 for a chevy malibu


co561 System Voltage unstable,, po751 Shift solenoid A CKT
performance or stuck Off,, po700 Trans Control Sys. Malfunction
these are OBD codes, hope that helps....

Feb 24, 2015 | 2007 Chevrolet Malibu

1 Answer

I have a2007 chevy silverado 4x4 1500 that has a check engine light on and codes are co561,bo775,770,780,785,790, b2725 what does this mean


Are you sure about those codes?? Virtually all computer codes are 4 digit numbers with two letters in front. Did you just omit the leading zeros maybe? If the truck will run I would take it to Autozone or some other auto parts store and have the codes pulled. They will then give you a print out of what the possible causes are.

Aug 14, 2014 | Chevrolet Chevy Cars & Trucks

1 Answer

Dtc 0700 jerks when shifting from reverse to drive


The transaxle Control Module (TCM) monitors the malfunction of sensors and actuators relating to transaxle control. When the TCM detects a malfunction with the control, a signal is send to the Engine Control Module (ECM) to trigger the Engine Light or Service Engine Soon light. The ECM stores the P0700 code and it means the TCM detected a malfunction with the transaxle controls.
Read more: http://engine-codes.com/p0700_dodge.html#ixzz3Pn5lTBcI

Mar 30, 2014 | 2005 Dodge Grand Caravan

1 Answer

MASSAIR FLOW SENSOR SYMPTOMS


poor running,stalling,a bad maf sensor will set a code. lack of power,spark knock/detonation,buck, jerk, hesitation on acceleration.also very hard shifts.

Mar 09, 2014 | 1998 Chevrolet Malibu

1 Answer

Problems with '05 GMC Sierra, Standard


Typically, a flashing light is more serious than a solid check-engine light. The flashing light is meant to alert you that you may have a misfire in your engine that will cause catalytic converter damage if you leave the problem unresolved. Replacing a catalytic converter can be costly, so have the engine checked as soon as possible by a certified mechanic.

Oct 03, 2017 | Cars & Trucks

1 Answer

I have a 2005 Mazda 6 S 6 cylinder automatic. It started to shift hard and jerk a couple months ago and just recently got worse. A couple days ago it jerked when I accelerated as usual, but kept jerking...


A U Code means a module is not communicating. A technician needs to find out what module is not communicating and make sure it is getting power, ground and can communicate, If any one is missing it may be in the wiring. If all are present the module is bad.
A scan tool will help in this process.

Dec 01, 2013 | 2005 Mazda 6

1 Answer

My 05 nissan maxima jerk when shift on reverse


Check your ignition coils. I have an 04 maxima, and it shift very hard into reverse. Code p0174 is my problem. That’s the no. 1 cylinder being faulty (ignition coil no. 1). I’m changing my ignition coils in the next 2 days.

Sep 08, 2012 | 2005 Nissan Maxima

1 Answer

Car jerks first it was while shifting down now its both any ideas


sounds to me like it could be your timing belt. It happens alot it manual cars, especially when you tend to drive hard and at high RPM's. Check it out.....it could save u alot of money

Jul 18, 2009 | 2004 Chevrolet Malibu

1 Answer

Transmission is "Hunting"


there are so many sensors nowdays that cause the same problem.---a bad throttle position sensor causes,:transmission shift issues,bucking, jerking, idle surging, engine cut off,hesitation on take off, surge while cruising down highway. a code will not allways set for a problem.

Oct 28, 2008 | 2001 Chevrolet Malibu

Not finding what you are looking for?
2005 Chevrolet Malibu Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

83850 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22413 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...