20 Most Recent 1996 Chevrolet Cavalier Questions & Answers


Have you checked the CV Axles? Since the noise goes away turning left to right. Another slim possibility may be the brake calipers but you said humming. And I would (assume- which means not always so) stuck calipers would only make the noise in one direction.

1996 Chevrolet... | Answered on Jul 11, 2019


There is no stand alone TCM for your Cavalier. The transmission is controlled through the ECM. Sometimes faulty speed sensors can cause shift issues but on the TH125 trans most times it's transmission failure.

1996 Chevrolet... | Answered on May 02, 2019


Good possibility that it has low fuel pressure due to worn pump or restricted fuel filter. Check these items. Also if the SES light is on, read the codes. It might tell you something about the problem. Watch this video

https://www.youtube.com/watch?v=8PuIIWxJXAM

1996 Chevrolet... | Answered on Apr 24, 2019


Tyhe first thing you shd always do on any car with starting problems is to check the spark on the plugs to localize the problem to either fuel or ignition problem. If u have an old spark plug lying around, remove one spark plug wire and attach it to the plug and lay it against the block. If it fires, when the engine turns, then it will most likely be fuel problem.
If it turns out to be fuel problem, you can prove it by using starting fluid carefully into the breather area.

If you need further help, reach me via phone at https://www.6ya.com/expert/gary_9c859f4aa7e5ab10

1996 Chevrolet... | Answered on Feb 13, 2018


Could be eather be vacumm or timming a little off.

1996 Chevrolet... | Answered on Dec 15, 2017


hi, check your trans fluid.. does it show on the stick? what is the color? red our dark..

1996 Chevrolet... | Answered on Dec 13, 2017


I usually want to check sensor wiring circuits before replacing anything. As you can see, the map sensor shares ref voltage and ground with others. Orange wire with black tracer is signal return. The gray wire should be ref voltage 5 volts. The signal wire should be lite green. Vacuum for the map sensor is also important. What was actual trouble code was it two digit code or five?
map-uptnujg2yoz4alcd31fjcd4i-1-0.jpg

1996 Chevrolet... | Answered on Oct 20, 2017


Could also be a vacuum leak, which is why there's no change when you remove the vacuum line. Don't start replacing parts until you do some diagnostics

1996 Chevrolet... | Answered on Oct 15, 2017


Hey Mizz_Kitty
No, its not loose wiring (unless you or someone has been tinkering under the hood)..Do you have gas (are you SURE- add some to make sure - the gauge maybe WRONG!),,There are numerous things that could be wrong... TOO many to cover here.. I would recommend towing this vehicle to a qualified professional and let them diagnose the problem!!

1996 Chevrolet... | Answered on Sep 26, 2017


Get this inspected by a shop IMMEDIATELY> This isn't a do it yourself project

1996 Chevrolet... | Answered on Sep 21, 2017

Not finding what you are looking for?
1996 Chevrolet Cavalier Logo

1,995 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85160 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Cavalier Chevrolet

  • Cavalier Chevrolet

Most Popular Question

fuel filter very clogged up cause

  • Cars & Trucks
Loading...